Cleaning and caring for the unit
50
Operating instructions
5.2 Removing rust spots
•
Remove fresh rust spots with a mild abrasive or fine sandpaper.
•
Always remove rust spots completely.
•
Expose treated areas to fresh air for at least 24 hours. During this
time, do not allow any contact with greases, oils or foods so that a
new protective layer can form.
5.3 Cleaning the housing
ATTENTION
Risk of physical damage from improper cleaning
•
Do not clean the housing with highly abrasive or chemically
aggressive cleaning agents.
•
Do not clean the housing with highly abrasive sponges.
Requirement
Unit switched off and cooled down
Clean the housing with warm water and commercially available
washing-up liquid.
5.4 Cleaning the frying surface between cooking processes
CAUTION
Risk of burns from hot surfaces
•
Protect arms and hands by wearing suitable protective
gloves.
The frying surface must be cleaned of frying residue between the
frying processes.
2021441-20ABBE-B
Содержание O7EMPF Series
