MK Martin Pulsar PTM48, Руководство оператора, Страница: 9 / 32

9
Preparation
1. Inspect implement for shipping damage. If damage
does exist, do not use. Notify your dealer immediately
to have damaged parts replaced or repaired.
2. Assembly may be required depending on how you
purchased your equipment. Follow the assembly
procedures as outlined in the manual, ensure all
hardware is secure.
3. Inspect all fasteners that they are not lose or missing.
Ensure fasteners and wheel bolts are torqued
according to the torque chart at the back of this
manual
4. Ensure that all applicable safety decals are installed
and legible.
5. Personal protection equipment (PPE) including hard
hat, safety glasses, safety shoes, and gloves are
recommended during assembly, installation, operation,
adjustment, maintaining, repairing, removal, cleaning,
or moving the unit. Do not allow long hair, loose fitting
clothing or jewelry to be around equipment.
6. PROLONGED EXPOSURE TO LOUD NOISE MAY
CAUSE PERMANENT HEARING LOSS!
Gas or diesel powered equipment can often be noisy
enough to cause permanent, partial hearing loss. We
recommend that you wear hearing protection on a full-
time basis. Noise over 85dB on a long-term basis can
cause severe hearing loss. Noise over 90db adjacent
to the Operator over a long-term basis may cause
permanent, total hearing loss.
7. When not attached to the power unit block the
implement to prevent movement.
Operation Safety
1. NEVER allow helpers or bystanders under or near the
machine.
2. Ensure the implement is securely attached to the
power unit before moving.
3. Inspect all fastening devices, do not use if worn or
damaged.
4. Make sure that bystanders and children are clear
before using or moving the implement.
5. NEVER position yourself between the power unit and
the implement while the power unit is running
6. Avoid distractions: wait until it is safe to operate
mobile communication equipment such as cell
phones, text messaging devices, pagers or two-
way radios: always give undivided attention to the
machine, the job at hand and your surroundings.
7. Do not put hands or feet near or under rotating parts.
8.
Watch for traffic when mowing near roadways.
9. Do not permit riders while operating this implement.
10.
Shut off the mower and exercise extreme caution
when on or crossing drives, walks, or roads.
11. Where possible, avoid operating near ditches,
embankments and holes.
12. Operate the machine up and down the face of slopes.
13. Exercise extreme caution when changing direction on
slopes.
14. NEVER operate on slopes greater than 20 degrees. or
wet or slippery slopes.
15. NEVER park the power unit on a steep grade or slope
16. Always wear the seat belt, if equipped, when mowing,
sudden contact with a hidden object can result in
serious personal injury.
17. Before beginning the job inspect areas to be mowed
for potential hazards, and mark obstructions with
stakes that will be seen in long grass or brush.
18. Avoid cutting wet grass or brush.
19. If the machine makes an unusual noise or vibration
or if there are obstructions underneath the machine,
shut off the power unit and the mower engine. Wait
five (5) minutes for the engine to cool. Disconnect the
spark plug and then inspect the machine for clogs or
loose parts. Clear any obstructions and repair and/or
replace damaged parts.
20. NEVER operate the mower when under the influence
of alcohol, drugs, or medication.
21. Keep all shields and guards in place.
22.
Do not fill fuel tank while engine is running or hot.
23. Use the remote E-STOP to stop the blade rotation
quickly.
Safe Work Area
Not all work spaces are the same, but the principles
presented here can be applied to any work space.
Survey the work site, remove debris and make note of
nearby or overhead obstructions, knowing your work area
will make the clearing job easier and safer.
Where possible, avoid operating near ditches,
embankments and holes.
For worker safety a preseason site visit is recommended.
Make a site clearing plan to identify hidden obstacles,
structures and dangerous incline areas. Sudden impact
from obstacles hidden in the grass may cause injury.
Be aware of:
Bystanders or any one not directly involved with the
work are only allowed outside of the work area, minimized
hazards.
Workers helping the operator must wear the appropriate
PPE and must always make eye contact with the operator
before entering the work area. Unauthorized Workers or
bystanders are not allowed in the work area. Hazards are
present.
Operator , do not operate the mower outside of the
operator area.