Mizuho MOT-VE100, Руководство оператора

Страница: 47 / 54

45
8
Before contacting for repairs
8
. Before contacting for repairs
„ „
Checking causes and countermeasures
The following problems can occur even if the operating table is not malfunctioning. Check the following points
before requesting repairs.
Status Possible cause Measures
The table cannot be
turned on.
The connector of the control unit is not
connected properly.
Insert the connector completely.
(
à
Page 17)
The battery is fully discharged. Charge the battery.
(
à
Page 16)
A function switch on
the control unit does
not function.
The connector of the control unit is not
connected properly.
Insert the connector completely.
(
à
Page 17)
E switch is not pressed simultaneously
with the function switch.
Press E switch and functional switch
simultaneously. (
à
Page 22 to 32)
Protection circuit is activated. Wait for about 20 minutes to operate.
(
à
Page 13)
The brake switch on
the control unit does
not function.
The emergency brake release handle is
in a release (UNLOCK) position.
Turn the emergency brake release
handle toward “LOCK”. (
à
Page 24)
After releasing the brake by the
emergency brake release handle, the
brake has not been unlocked by the
control unit.
Unlock the brake by the control unit.
(
à
Page 24)
If the situation does not improve even if the above countermeasures are implemented, request repairs from
your distributor or Mizuho.