26
4
Operation
4.7 Tilting the back plate
WARNING
Keep your hands away from the following gap during the operation of the table.
You may get injured.
•
Gap between the back plate and waist plate
•
Gap between the back plate gear and rack
Back plate
Waist plate
Back plate gear
Rack
Moving up the back plate
1.
Hold down
ENERGIZE
and press
BACK UP
.
The back plate moves up.
TABLE UP
ENERGIZE
ON/OFF
ＰＲＥＳＳ ＴＯ
ＬＯＣＫ ＢＲＡＫＥＳ
LEVEL
BRAKE UNLOCK
REFLEX
FLEX
SLIDE HEAD
SLIDE FOOT
TABLE DOWN
BACK UP
BACK DOWN
TILT LEFT
TILT RIGHT
REV. TREND.
POWER BATT.
PILOT
MOT-5602BW
TREND.
90°
Moving down the back plate
1.
Hold down
ENERGIZE
and press
BACK DOWN
.
The back plate moves down.
TABLE UP
ENERGIZE
ON/OFF
ＰＲＥＳＳ ＴＯ
ＬＯＣＫ ＢＲＡＫＥＳ
LEVEL
BRAKE UNLOCK
REFLEX
FLEX
SLIDE HEAD
SLIDE FOOT
TABLE DOWN
BACK UP
BACK DOWN
TILT LEFT
TILT RIGHT
REV. TREND.
POWER BATT.
PILOT
MOT-5602BW
TREND.
40°
NOTE
•
The maximum angle
achieved in the back plate
up position is 90° to the level
position.
•
The maximum angle
achieved in the back plate
down position is 40° to the
level position.
•
When the tabletop center
point is slid in the foot
direction beyond the standard
center position, the back
plate does not move down
beyond the level position and
the buzzer will sound. If the
tabletop center point is slid
in the head direction beyond
the standard center position,
the back plate moves down.
Tabletop center
(Head side)
(Leg side)
•
When the back plate is tilted
in the opposite direction from
the current tilted back plate
position, the tilting operation
stops in the level position.
Once it stops, release the
switch and press it once
again; it will be tilted to the
maximum angle.