Mitsubishi QJ71GP21-SX, Справочное руководство

Страница: 176 / 650

6
- 21 6.3 Network Range Assignment
6.3.3 Shared group
6
PARAMETER SETTING
6.3.3 Shared group
For a Universal model QCPU, set the stations that share their cyclic data to the same
Shared group No. (Setting range: None or 1 to 120, Default: None)
This setting is common to [LB/LW settings (1) ], [LB/LW settings (2) ] and [LX/LY settings
(1)], and [LX/LY settings (2)].
For details, refer to the following.
Section 4.1.8 Group cyclic transmission
(1) Directly entering a shared group No.
Directly enter a shared group No. in the shared group area of [Assignment the CC IE
Control network range].
(2) Using Shared group setting
Using the Shared group setting, set Shared group No.1.
1) Clicking on in [Assignment the CC IE Control
network range] will display the [CC IE Control shared group]
dialog box
.
2) In the Shared group column, select (Edit shared group
specification), and click on .
In the [Shared group setting]
dialog box
displayed, enter "1" and
click on .
3) In the [Shared group setting (Shared group 1)]
dialog box,
select a station No. to be set for Shared group No.1 to add to
Registered station No. and click on .
4) Click on .
In the Shared group column of [Assignment the CC IE Control
network range], Shared group No.1 is set.
5) To set a new shared group, repeat the above 2) and 3).
6) To edit an existing shared group, select the shared group No. and
click on to perform the operation of the above 3).