6
5. WIRING
5.1
Wiring Instructions
(1) Do not strip the insulation of the connectable wire before wiring.
(2) The number of connectable wire per terminal is 1.
(3) Wire the far side line B terminals first.
(4) To prevent the wires from pushing the adjacent modules, connect
them after pulling them toward you within the wire's tensile
strength range given in the performance specifications.
(5) During and after wiring, do not apply loads larger than the wire's
tensile strength given in the performance specifications to the
wires.
(6) When reusing the wire that has been connected to this connector
once, cut off its insulation displacement end face in advance.
I/O module
Forward