A - 2
[INSTALLATION PRECAUTIONS]
CAUTION
Use the programmable controller in an environment that meets the general
specifications contained in the CPU user's manual.
Using this programmable controller in an environment outside the range of
the general specifications may cause electric shock, fire, malfunction, and
damage to or deterioration of the product.
When installing the module, securely insert the module fixing tabs into the
mounting holes of the base module while pressing the installation lever
located at the bottom of the module downward.
Improper installation may result in malfunction, breakdown or the module
coming loose and dropping. Securely fix the module with screws if it is
subject to vibration during use.
Tighten the screws within the range of specified torque.
If the screws are loose, it may cause the module to fallout, short circuits, or
malfunction.
If the screws are tightened too much, it may cause damage to the screw
and/or the module, resulting in fallout, short circuits or malfunction.
Switch all phases of the external power supply off when mounting or
removing the module.
Not ding so may cause electric shock or damage to the module.
Do not directly touch the conductive area or electronic components of the
module.
Doing so may cause malfunction or failure in the module.
[WIRING PRECAUTIONS]
CAUTION
Be careful not to let foreign matters such as sawdust or wire chips get
inside the module.
They may cause fires, failure or malfunction.
The top surface of the module is covered with protective film to prevent
foreign objects such as cable offcuts from entering the module when wiring.
Do not remove this film until the wiring is complete.
Before operating the system, be sure to remove the film to provide
adequate heat ventilation.
Be sure to fix communication cables or power supply cables leading from
the module by placing them in the duct or clamping them.
Cables not placed in the duct or without clamping may hang or shift,
allowing them to be accidentally pulled, which may cause a module
malfunction and cable damage.
