manualshive.com logo in svg

Mitsubishi Q2ACPU, Руководство пользователя

Процессор Mitsubishi Q2ACPU - это надежное устройство для автоматизации процессов. Вы можете бесплатно скачать руководство пользователя на нашем сайте для полного понимания возможностей этого продукта. Необходимую информацию можно загрузить с нашего сайта в любое удобное время.

Поделиться
Скачать
background image

Warranty

Please confirm the following product warranty details before using this product.

1. Gratis Warranty Term and Gratis Warranty Range

If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsubishi occurs during use of the 
product within the gratis warranty term, the product shall be repaired at no cost via the sales representative or 
Mitsubishi Service Company.
However, if repairs are required onsite at domestic or overseas location, expenses to send an engineer will be 
solely at the customer's discretion.  Mitsubishi shall not be held responsible for any re-commissioning, 
maintenance, or testing on-site that involves replacement of the failed module.
[Gratis Warranty Term]
The gratis warranty term of the product shall be for one year after the date of purchase or delivery to a designated 
place.
Note that after manufacture and shipment from Mitsubishi, the maximum distribution period shall be six (6) months, 
and the longest gratis warranty term after manufacturing shall be eighteen (18) months. The gratis warranty term of 
repair parts shall not exceed the gratis warranty term before repairs.
 [Gratis Warranty Range]
(1) The range shall be limited to normal use within the usage state, usage methods and usage environment, etc., 

which follow the conditions and precautions, etc., given in the instruction manual, user's manual and caution 
labels on the product.

(2) Even within the gratis warranty term, repairs shall be charged for in the following cases.

1. Failure occurring from inappropriate storage or handling, carelessness or negligence by the user. Failure 

caused by the user's hardware or software design.

2. Failure caused by unapproved modifications, etc., to the product by the user.
3. When the Mitsubishi product is assembled into a user's device, Failure that could have been avoided if 

functions or structures, judged as necessary in the legal safety measures the user's device is subject to or 
as necessary by industry standards, had been provided.

4. Failure that could have been avoided if consumable parts (battery, backlight, fuse, etc.) designated in the 

instruction manual had been correctly serviced or replaced.

5. Failure caused by external irresistible forces such as fires or abnormal voltages, and Failure caused by force 

majeure such as earthquakes, lightning, wind and water damage.

6. Failure caused by reasons unpredictable by scientific technology standards at time of shipment from 

Mitsubishi.

7. Any other failure found not to be the responsibility of Mitsubishi or that admitted not to be so by the user.

2. Onerous repair term after discontinuation of production

(1) Mitsubishi shall accept onerous product repairs for seven (7) years after production of the product is 

discontinued.
Discontinuation of production shall be notified with Mitsubishi Technical Bulletins, etc.

(2)  Product supply (including repair parts) is not available after production is discontinued.

3. Overseas service

Overseas, repairs shall be accepted by Mitsubishi's local overseas FA Center. Note that the repair conditions at 
each FA Center may differ.

4. Exclusion of loss in opportunity and secondary loss from warranty liability

Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation of damages caused by any 
cause found not to be the responsibility of Mitsubishi, loss in opportunity, lost profits incurred to the user by Failures 
of Mitsubishi products, special damages and secondary damages whether foreseeable or not , compensation for 
accidents, and compensation for damages to products other than Mitsubishi products, replacement by the user, 
maintenance of on-site equipment, start-up test run and other tasks.

5. Changes in product specifications

The specifications given in the catalogs, manuals or technical documents are subject to change without prior notice.

IB(NA)66608-F

Содержание Q2ACPU



























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Q2ACPU

Eaton ELC-COENETM Instruction Sheet preview
ELC-COENETM
Бренд: Eaton Страницы: 6
Eaton InsulGard Installation And Start Up Manualline preview
InsulGard
Бренд: Eaton Страницы: 35
Eaton xStorage Home User Interface Manual preview
xStorage Home
Бренд: Eaton Страницы: 18
Eaton DF6000 Application Manual preview
DF6000
Бренд: Eaton Страницы: 73
Eaton DALI Installation Manual preview
DALI
Бренд: Eaton Страницы: 4
Eaton Cutler-Hammer IQ DP-4000 Installation, Operation And Maintenance Instructions preview
Cutler-Hammer IQ DP-4000
Бренд: Eaton Страницы: 87
Eaton Char-Lynn Manual preview
Char-Lynn
Бренд: Eaton Страницы: 14
Eaton BiWire Flexi Installation Manual preview
BiWire Flexi
Бренд: Eaton Страницы: 36
IFM Electronic ecomat 100 R 360 Operating Instructions Manual preview
ecomat 100 R 360
Бренд: IFM Electronic Страницы: 16
IFM Electronic Ecomot300 AC2630 Operating Instructions Manual preview
Ecomot300 AC2630
Бренд: IFM Electronic Страницы: 11
IFM Electronic AC1331 Installation Instructions Manual preview
AC1331
Бренд: IFM Electronic Страницы: 23
National Instruments PXIe-8238 Getting Started Manual preview
PXIe-8238
Бренд: National Instruments Страницы: 6
National Instruments PXI-8231 Installation Manual preview
PXI-8231
Бренд: National Instruments Страницы: 6
olympia electronics GR-6500 Quick Installation Manual preview
GR-6500
Бренд: olympia electronics Страницы: 10
Saab R5 SUPREME AIS Short Instruction preview
R5 SUPREME AIS
Бренд: Saab Страницы: 4
National Instruments PXI-8150B User Manual preview
PXI-8150B
Бренд: National Instruments Страницы: 78
Parker PWD Series Operation Manual preview
PWD Series
Бренд: Parker Страницы: 38
Parker Racor RK 30770 Operation And Safety Instructions preview
Racor RK 30770
Бренд: Parker Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды