manualshive.com logo in svg

Mitsubishi Q00CPU, Руководство пользователя

Процессор Mitsubishi Q00CPU обеспечивает высокую производительность и надежность в промышленных автоматизированных системах. Пользователи могут бесплатно скачать руководство пользователя на manualshive.com для удобства в настройке и эксплуатации данного продукта. Необходимая информация всегда под рукой, способствуя безопасной и эффективной работе.

Поделиться
Скачать
background image

Warranty

Please confirm the following product warranty details before using this product.

1. Gratis Warranty Term and Gratis Warranty Range

If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsubishi occurs during use of the
product within the gratis warranty term, the product shall be repaired at no cost via the sales representative or
Mitsubishi Service Company.
However, if repairs are required onsite at domestic or overseas location, expenses to send an engineer will be
solely at the customer's discretion.  Mitsubishi shall not be held responsible for any re-commissioning,
maintenance, or testing on-site that involves replacement of the failed module.
[Gratis Warranty Term]
The gratis warranty term of the product shall be for one year after the date of purchase or delivery to a designated
place.
Note that after manufacture and shipment from Mitsubishi, the maximum distribution period shall be six (6) months,
and the longest gratis warranty term after manufacturing shall be eighteen (18) months. The gratis warranty term of
repair parts shall not exceed the gratis warranty term before repairs.
 [Gratis Warranty Range]
(1) The range shall be limited to normal use within the usage state, usage methods and usage environment, etc.,

which follow the conditions and precautions, etc., given in the instruction manual, user's manual and caution
labels on the product.

(2) Even within the gratis warranty term, repairs shall be charged for in the following cases.

1. Failure occurring from inappropriate storage or handling, carelessness or negligence by the user. Failure

caused by the user's hardware or software design.

2. Failure caused by unapproved modifications, etc., to the product by the user.
3. When the Mitsubishi product is assembled into a user's device, Failure that could have been avoided if

functions or structures, judged as necessary in the legal safety measures the user's device is subject to or
as necessary by industry standards, had been provided.

4. Failure that could have been avoided if consumable parts (battery, backlight, fuse, etc.) designated in the

instruction manual had been correctly serviced or replaced.

5. Failure caused by external irresistible forces such as fires or abnormal voltages, and Failure caused by force

majeure such as earthquakes, lightning, wind and water damage.

6. Failure caused by reasons unpredictable by scientific technology standards at time of shipment from

Mitsubishi.

7. Any other failure found not to be the responsibility of Mitsubishi or that admitted not to be so by the user.

2. Onerous repair term after discontinuation of production

(1) Mitsubishi shall accept onerous product repairs for seven (7) years after production of the product is

discontinued.
Discontinuation of production shall be notified with Mitsubishi Technical Bulletins, etc.

(2)  Product supply (including repair parts) is not available after production is discontinued.

3. Overseas service

Overseas, repairs shall be accepted by Mitsubishi's local overseas FA Center. Note that the repair conditions at
each FA Center may differ.

4. Exclusion of loss in opportunity and secondary loss from warranty liability

Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation of damages caused by any
cause found not to be the responsibility of Mitsubishi, loss in opportunity, lost profits incurred to the user by Failures
of Mitsubishi products, special damages and secondary damages whether foreseeable or not , compensation for
accidents, and compensation for damages to products other than Mitsubishi products, replacement by the user,
maintenance of on-site equipment, start-up test run and other tasks.

5. Changes in product specifications

The specifications given in the catalogs, manuals or technical documents are subject to change without prior notice.

6. Product application

(1) In using the Mitsubishi MELSEC programmable controller, the usage conditions shall be that the application will

not lead to a major accident even if any problem or fault should occur in the programmable controller device,
and that backup and fail-safe functions are systematically provided outside of the device for any problem or
fault.

(2) The Mitsubishi programmable controller has been designed and manufactured for applications in general

industries, etc. Thus, applications in which the public could be affected such as in nuclear power plants and
other power plants operated by respective power companies, and applications in which a special quality
assurance system is required, such as for Railway companies or Public service purposes shall be excluded
from the programmable controller applications.
In addition, applications in which human life or property that could be greatly affected, such as in aircraft,
medical applications, incineration and fuel devices, manned transportation, equipment for recreation and
amusement, and safety devices, shall also be excluded from the programmable controller range of
applications.
However, in certain cases, some applications may be possible, providing the user consults their local
Mitsubishi representative outlining the special requirements of the project, and providing that all parties
concerned agree to the special circumstances, solely at the users discretion.

Содержание Q00CPU

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Q00CPU

C&K systems Securit 800L Specfications preview
Securit 800L
Бренд: C&K systems Страницы: 2
Abus FUMO50110 Quick Manual preview
FUMO50110
Бренд: Abus Страницы: 12
Campbell CR10 PROM Replacement Procedure preview
CR10 PROM
Бренд: Campbell Страницы: 8
Campbell CS225 Instruction Manual preview
CS225
Бренд: Campbell Страницы: 22
Samson 3351 Mounting And Operating Instructions preview
3351
Бренд: Samson Страницы: 20
L-Acoustics LA4X Maintenance Manual preview
LA4X
Бренд: L-Acoustics Страницы: 24
L-Acoustics LA8 Maintenance Manual preview
LA8
Бренд: L-Acoustics Страницы: 21
M&S Systems MC960 Installation Manual preview
MC960
Бренд: M&S Systems Страницы: 4
oventrop 2104203 Operating Instructions Manual preview
2104203
Бренд: oventrop Страницы: 64
ACL ACL 5500 Installation Manual preview
ACL 5500
Бренд: ACL Страницы: 20
SDC E4KP ENTRYCHECK Operating Instructions Manual preview
E4KP ENTRYCHECK
Бренд: SDC Страницы: 6
Bardiani Valvole BBWMF1 Instruction, Use And Maintenance Manual preview
BBWMF1
Бренд: Bardiani Valvole Страницы: 118
Giesecke & Devrient StarSign Bio Token 3.0 M Reference Manual preview
StarSign Bio Token 3.0 M
Бренд: Giesecke & Devrient Страницы: 28
HM-Funktechnik HM 2225 Installation And Operation Instruction Manual preview
HM 2225
Бренд: HM-Funktechnik Страницы: 20
OBO Bettermann C50-0-255 Installation Instructions Manual preview
C50-0-255
Бренд: OBO Bettermann Страницы: 6
AUMA PROFOX PF-M100 Operation Instructions Manual preview
PROFOX PF-M100
Бренд: AUMA Страницы: 48
Daikin BRC7EA628 Installation Manual preview
BRC7EA628
Бренд: Daikin Страницы: 12
Taconova Tacosol Load EXA L Manual preview
Tacosol Load EXA L
Бренд: Taconova Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды