Mitsubishi Q00CPU, Руководство пользователя

Страница: 300 / 976

5
- 76 5.4 File Operation by GX Developer and Handling Precautions
5.4.4 File size units
5
MEMORIES AND FILES HANDLED BY CPU MODULE
POINT
The file size unit of the following CPU modules has been changed.
• High Performance model QCPU whose first 5 digits of serial No. is
"04122" or later.
• Process CPU whose first 5 digits of serial No. is "07032" or later.
Hence, note the following points.
1. Depending on the file capacity, the file executed by the CPU module of above
serial No. or later may not be stored into the CPU module of above serial No.
or before.
2. Combination of PLC write and GX Developer
The following table indicates the combination of High Performance model
QCPU/Process CPU and GX Developer versions when a file is read from the
High Performance model QCPU/Process CPU to GX Developer and then
written to another High Performance model QCPU/Process CPU.
(High Performance model QCPU)
Legends : Write to PLC enabled : Restriction on write to PLC
* 1 : Because of different file size units, the file may not be stored into the High Performance model
QCPU depending on the file capacity.
* 2 : Unless the number of allocate memory for online change is decreased, the file may not be stored
into the High Performance model QCPU depending on the file capacity.
(Process CPU)
Legends : Write to PLC enabled : Restriction on write to PLC
* 1 : Because of different file size units, the file may not be stored into the High Performance model
QCPU depending on the file capacity.
* 2 : Unless the number of allocate memory for online change is decreased, the file may not be stored
into the High Performance model QCPU depending on the file capacity.
Write destination
Write source
GX Developer Version8 GX Developer Version7
File executed by CPU
of serial No. "04122"
or later
File executed by CPU
of serial No. "04121"
or earlier
File executed by CPU
of serial No. "04122"
or later
File executed by CPU
of serial No. "04121"
or earlier
Serial No. "04122" or
later
*2
*2
Serial No. "04121" or
earlier
*1 *1 *2 *2
Write destination
Write source
GX Developer Version8 GX Developer Version7
File executed by CPU
of serial No. "07032"
or later
File executed by CPU
of serial No. "07031"
or earlier
File executed by CPU
of serial No. "07032"
or later
File executed by CPU
of serial No. "07031"
or earlier
Serial No. "07032" or
later
*2 *2
Serial No. "07031" or
earlier
*1 *1 *2 *2