manualshive.com logo in svg

Mitsubishi NZ2GFCF-D62PD2, Руководство пользователя

"User Manual для Mitsubishi NZ2GFCF-D62PD2 доступен для загрузки бесплатно на нашем сайте. Этот документ содержит всю необходимую информацию для правильного использования продукта. Скачайте его сейчас и наслаждайтесь комфортом и надежностью Mitsubishi NZ2GFCF-D62PD2."

Поделиться
Скачать
background image

34

*1

The operation mode can be set in the parameter setting. For details, refer to the following.

Page 80, Section 7.1

Counter function selection

This function executes the counter function selection using both the 
program and CH

 Function input terminal (FUNC1, FUNC2) of the 

connector for external devices, or using either of them.

Normal 
mode

Page 129, 
Section 8.6

Count disable function

This function stops counting pulses while CH

 Count enable 

command (RY24, RY3C) is on.

Page 131, 
Section 8.7

Latch counter function

This function acquires the count value and stores it in the remote 
register.

Page 133, 
Section 8.8

Sampling counter function

This function counts pulses that are input during the preset 
sampling period.

Page 136, 
Section 8.9

Periodic pulse counter function

This function stores the present value and difference value to the 
corresponding remote registers by the preset cycle time.

Page 139, 
Section 8.10

Count disable/preset/replace 
function

According to the status change of CH

 Function input terminal 

(FUNC1, FUNC2) of the connector for external devices, this 
function executes the count disable function and preset/replace 
function without switching the functions.

Page 142, 
Section 8.11

Latch counter/preset/replace 
function

According to the status change of CH

 Function input terminal 

(FUNC1, FUNC2) of the connector for external devices, this 
function executes the latch counter function and preset/replace 
function without switching the functions.

Page 145, 
Section 8.12

Frequency measurement function

This function counts the pulses of the pulse input terminals in 
phase A and B, and automatically calculates the frequency.

Frequency 
measureme
nt mode

Page 148, 
Section 8.13

Rotation speed measurement function

This function counts the pulses of the pulse input terminals in 
phase A and B, and automatically calculates the rotation speed.

Rotation 
speed 
measureme
nt mode

Page 152, 
Section 8.14

Pulse measurement function

This function measures CH

 Function input terminal (FUNC1, 

FUNC2) or CH

 Latch counter input terminal (LATCH1, LATCH2) 

of the connector for external devices, and calculates the ON width.

Pulse 
measureme
nt mode

Page 156, 
Section 8.15

PWM output function

This function outputs the specified PWM waveform from any 
coincidence output 1 to 4 terminals (EQU1 to EQU4).

PWM output 
mode

Page 160, 
Section 8.16

Output HOLD/CLEAR setting function

This function sets the output status of the extension output module 
(Y0 to YF) used as the output of Coincidence output (EQU1 to 
EQU4) and the cam switch function to HOLD or CLEAR.

Common to 
all modes

Page 167, 
Section 8.17

Cyclic data update watch function

This function monitors the cyclic data update interval. When the 
cyclic transmission remains to be stopped over the set watch time, 
this function holds or clears the value which is output just before.

Page 168, 
Section 8.18

Error notification function

When a moderate error or a major error occurs in the high-speed 
counter module, this function notifies the master station of the error 
using the remote register and the remote input signal.

Page 169, 
Section 8.19

Function at the extension module 
installation

One extension I/O module can be connected to one high-speed 
counter module.
The cam switch function can be used by connecting the extension 
I/O module. In addition, functions unique to the extension I/O 
module can be used.

Page 172, 
Section 8.20

CC-Link IE Field Network diagnostic 
function

With this function, whether any network error occurs or not can be 
checked through GX Works2 connected to the CPU module.

Page 175, 
Section 8.21

Function name

Description

Operation 

mode

*1

Reference

Содержание NZ2GFCF-D62PD2

















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NZ2GFCF-D62PD2

ABB FEPL-02 Ethernet POWERLINK Quick Installation And Start-Up Manual preview
FEPL-02 Ethernet POWERLINK
Бренд: ABB Страницы: 2
ABB FENA-01 Quick Installation And Start-Up Manual preview
FENA-01
Бренд: ABB Страницы: 2
Farris Engineering 2600 Series General Installation And Maintenance Instructions preview
2600 Series
Бренд: Farris Engineering Страницы: 12
Eastern Times Technology BT-100 Quick Start Manual preview
BT-100
Бренд: Eastern Times Technology Страницы: 4
Vacon 10 Quick Manual preview
10
Бренд: Vacon Страницы: 18
Echelon Excel 50 Installation Instructions Manual preview
Excel 50
Бренд: Echelon Страницы: 40
IBM ServeRAID M5014 User Manual preview
ServeRAID M5014
Бренд: IBM Страницы: 106
XBOX ONE Get To Know preview
ONE
Бренд: XBOX Страницы: 4
7bit Synapse Instruction Manual preview
Synapse
Бренд: 7bit Страницы: 2
Jafar 5220 Operation And Maintenance Manual preview
5220
Бренд: Jafar Страницы: 15
Kasco C10 Installation & Operation Manual preview
C10
Бренд: Kasco Страницы: 3
C Prox Ltd FP1 User Manual preview
FP1
Бренд: C Prox Ltd Страницы: 5
Eaton COOPER POWER SERIES Installation And Operation Instruction Manual preview
COOPER POWER SERIES
Бренд: Eaton Страницы: 50
QUAD 34 Instruction Book preview
34
Бренд: QUAD Страницы: 17
fadini VIGILO 2250 Instruction Manual preview
VIGILO 2250
Бренд: fadini Страницы: 16
Fagor CNC 8070 Original Instructions Manual preview
CNC 8070
Бренд: Fagor Страницы: 10
Fagor CNC 8070 Operating Manual preview
CNC 8070
Бренд: Fagor Страницы: 358
Fagor CNC 8070 Programming Manual preview
CNC 8070
Бренд: Fagor Страницы: 556

Бренды по названию

Популярные бренды

Загрузить еще бренды