manualshive.com logo in svg

Mitsubishi NZ2GFCF-D62PD2, Руководство пользователя

"User Manual для Mitsubishi NZ2GFCF-D62PD2 доступен для загрузки бесплатно на нашем сайте. Этот документ содержит всю необходимую информацию для правильного использования продукта. Скачайте его сейчас и наслаждайтесь комфортом и надежностью Mitsubishi NZ2GFCF-D62PD2."

Поделиться
Скачать
background image

299

WARRANTY

Please confirm the following product warranty details before using this product.

1. Gratis Warranty Term and Gratis Warranty Range

If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsubishi occurs during use of the 
product within the gratis warranty term, the product shall be repaired at no cost via the sales representative or 
Mitsubishi Service Company.
However, if repairs are required onsite at domestic or overseas location, expenses to send an engineer will be 
solely at the customer's discretion.  Mitsubishi shall not be held responsible for any re-commissioning, 
maintenance, or testing on-site that involves replacement of the failed module.
[Gratis Warranty Term]
The gratis warranty term of the product shall be for one year after the date of purchase or delivery to a designated 
place.
Note that after manufacture and shipment from Mitsubishi, the maximum distribution period shall be six (6) months, 
and the longest gratis warranty term after manufacturing shall be eighteen (18) months. The gratis warranty term of 
repair parts shall not exceed the gratis warranty term before repairs.
[Gratis Warranty Range]
(1) The range shall be limited to normal use within the usage state, usage methods and usage environment, etc., 

which follow the conditions and precautions, etc., given in the instruction manual, user's manual and caution 
labels on the product.

(2) Even within the gratis warranty term, repairs shall be charged for in the following cases.

1. Failure occurring from inappropriate storage or handling, carelessness or negligence by the user. Failure 

caused by the user's hardware or software design.

2. Failure caused by unapproved modifications, etc., to the product by the user.
3. When the Mitsubishi product is assembled into a user's device, Failure that could have been avoided if 

functions or structures, judged as necessary in the legal safety measures the user's device is subject to or 
as necessary by industry standards, had been provided.

4. Failure that could have been avoided if consumable parts (battery, backlight, fuse, etc.) designated in the 

instruction manual had been correctly serviced or replaced.

5. Failure caused by external irresistible forces such as fires or abnormal voltages, and Failure caused by 

force majeure such as earthquakes, lightning, wind and water damage.

6. Failure caused by reasons unpredictable by scientific technology standards at time of shipment from 

Mitsubishi.

7. Any other failure found not to be the responsibility of Mitsubishi or that admitted not to be so by the user.

2. Onerous repair term after discontinuation of production

(1) Mitsubishi shall accept onerous product repairs for seven (7) years after production of the product is 

discontinued.
Discontinuation of production shall be notified with Mitsubishi Technical Bulletins, etc.

(2) Product supply (including repair parts) is not available after production is discontinued.

3. Overseas service

Overseas, repairs shall be accepted by Mitsubishi's local overseas FA Center. Note that the repair conditions at 
each FA Center may differ.

4. Exclusion of loss in opportunity and secondary loss from warranty liability

Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation of damages caused by any 
cause found not to be the responsibility of Mitsubishi, loss in opportunity, lost profits incurred to the user by Failures 
of Mitsubishi products, special damages and secondary damages whether foreseeable or not, compensation for 
accidents, and compensation for damages to products other than Mitsubishi products, replacement by the user, 
maintenance of on-site equipment, start-up test run and other tasks.

5. Changes in product specifications

The specifications given in the catalogs, manuals or technical documents are subject to change without prior notice.

Содержание NZ2GFCF-D62PD2

















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NZ2GFCF-D62PD2

Eaton i-on Compact Quick Setup Manual preview
i-on Compact
Бренд: Eaton Страницы: 12
fadini ZERO.SAPE Manual preview
ZERO.SAPE
Бренд: fadini Страницы: 28
GEA VESTA Operating Instructions Manual preview
VESTA
Бренд: GEA Страницы: 47
Parker TFP Series Operation Manual preview
TFP Series
Бренд: Parker Страницы: 16
ZKTeco SRB Connection Manual preview
SRB
Бренд: ZKTeco Страницы: 2
National Instruments NI 9514 User Manual preview
NI 9514
Бренд: National Instruments Страницы: 72
National Instruments NI 9514 Operating Instructions And Specifications preview
NI 9514
Бренд: National Instruments Страницы: 41
NAPCO MAGNUM ALERT 3000 FIRE ALARM Basic Operating Instructions preview
MAGNUM ALERT 3000 FIRE ALARM
Бренд: NAPCO Страницы: 2
Dakota Digital BIM-01-2-FTCH Manual preview
BIM-01-2-FTCH
Бренд: Dakota Digital Страницы: 12
turck TBEN-L 8IOL Series Instructions For Use Manual preview
TBEN-L 8IOL Series
Бренд: turck Страницы: 148
Bartec APEXpy 07-37A2-2111/ 520Series Operating Instructions Manual preview
APEXpy 07-37A2-2111/ 520Series
Бренд: Bartec Страницы: 98
Tenpilot TP06 3Rw Quick Start Manual preview
TP06 3Rw
Бренд: Tenpilot Страницы: 2
DAY 72847 Instruction Manual preview
72847
Бренд: DAY Страницы: 23
YASKAWA Lift Inverter L1000V Technical Manual preview
Lift Inverter L1000V
Бренд: YASKAWA Страницы: 282
Patton SmartNode 5501 User Manual preview
SmartNode 5501
Бренд: Patton Страницы: 56
Watts Vision BT-A02 RF Description And Application Manual preview
Vision BT-A02 RF
Бренд: Watts Страницы: 19
Taylor i16 Operating Manual preview
i16
Бренд: Taylor Страницы: 34
PTZOptics PT-JOY-G4 Quick Start Manual preview
PT-JOY-G4
Бренд: PTZOptics Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды