Mitsubishi NZ2GFCF-D62PD2, Руководство пользователя

Страница: 281 / 304

279
APPENDICES
A
Appendix 3 Details of R
emote Buffer
Memory Addresses
(18)Station-based control data (address: 1003
H
)
(19)Station-based control data (address: 1004
H
)
Address Name Description Default
1003
H
Parameter area
initialization
completed
• When initialization of the parameter information and the extended parameter
information stored in the remote buffer memory and the nonvolatile memory is
completed, Parameter area initialization completed (address: 1003
H
)
changes to Initialization is completed (1).
• When Parameter area initialization command (address: 1002
H
) is set to Not
commanded (0), Parameter area initialization completed (address: 1003
H
)
changes to Initialization is not performed (0).
• The following shows the range of values which can be stored.
0000
H
Address Name Description Default
1004
H
Module operation
information
initialization
command
• The module operation information stored in the remote buffer memory and the
nonvolatile memory is initialized by this command. The module operation
information can be initialized only when Nonvolatile memory data error
(module operation information) (error code: 0110
H
) has occurred.
• The following shows the setting range.
• When Module operation information initialization command (address: 1004
H
)
is set to Commanded (1), the module operation information stored in the
remote buffer memory and the nonvolatile memory is cleared and Module
operation information initialization completed (address: 1005
H
) changes to
Initialization is completed (1).
0000
H
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 (fixed)
b15 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 b10 b11 b12 b13 b14
0: Initialization is
not performed
1: Initialization is
completed
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 (fixed)
b15 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 b10 b11 b12 b13 b14
0: Not
commanded
1: Commanded
Controlled by the high-speed counter module
Error data of
module operation
Module operation
information initialization
command
(address: 1004
H
)
Module operation
information initialization
completed
(address: 1005
H
)
Controlled by the program
Module operation information Default value
Not commanded (0) Not commanded (0) Commanded (1)
Not
performed (0)
Not performed (0)
Completed
(1)