manualshive.com logo in svg

Mitsubishi NZ2GFCF-D62PD2, Руководство пользователя

"User Manual для Mitsubishi NZ2GFCF-D62PD2 доступен для загрузки бесплатно на нашем сайте. Этот документ содержит всю необходимую информацию для правильного использования продукта. Скачайте его сейчас и наслаждайтесь комфортом и надежностью Mitsubishi NZ2GFCF-D62PD2."

Поделиться
Скачать
background image

12

TERM

Unless otherwise specified, this manual uses the following terms.

Term

Description

CC-Link IE Field Network

A high-speed and large-capacity open field network that is based on Ethernet (1000BASE-T)

GX Works2

The product name of the software package for the MELSEC programmable controllers

REMFR

The abbreviation for ZP.REMFR.
This dedicated instruction is used in programs of the master/local module.

REMTO

The abbreviation for ZP.REMTO.
This dedicated instruction is used in programs of the master/local module.

Intelligent device station

A station that deals with bit data and word data.
The station can communicate with the master station and other local stations. The station cannot 
communicate with other remote I/O stations, remote device stations and intelligent device stations.
The station can perform the cyclic transmission and transient transmission.

Cyclic transmission

A function by which data are periodically exchanged among stations on the same network using link 
devices (RX, RY, RWw, and RWr)

Slave station

A generic term for stations other than a master station: local station, remote I/O station, remote 
device station, and intelligent device station

Data link

A generic term for cyclic transmission and transient transmission

Transient transmission

A function of communication with another station, which is used when requested by a dedicated 
instruction or GX Works2

Network module

A generic term for the following modules:

• CC-Link IE Field Network module
• CC-Link IE Controller Network module
• Ethernet interface module
• MELSECNET/H module
• MELSECNET/10 module

Buffer memory

A memory in an intelligent function module, where data (such as setting values and monitoring 
values) are stored

Programming tool

Another term for GX Works2

Master/local module

A generic term for the CC-Link IE Field Network master/local module

Master station

A station that controls CC-Link IE Field Network. The station can communicate with all stations.
Only one master station can be used in a network.
The station can perform the cyclic transmission and transient transmission.

Remote I/O station

A station that deals with bit data.
The station can communicate with the master station and other local stations. The station cannot 
communicate with other remote I/O stations, remote device stations and intelligent device stations.
The station can perform the cyclic transmission.

Remote device station

A station that deals with bit data and word data.
The station can communicate with the master station and other local stations. The station cannot 
communicate with other remote I/O stations, remote device stations and intelligent device stations.
The station can perform the cyclic transmission.

Remote buffer memory

Buffer memory in a remote device station

Remote register (RWr)

Word data input from a slave station to the master station (For some areas in a local station, data are 
output in the opposite direction.)

User's manual for the master/local module used

Remote register (RWw)

Word data output from the master station to a slave station (For some areas in a local station, data 
are output in the opposite direction.)

User's manual for the master/local module used

Remote output (RY)

Bit data output from the master station to a slave station (For some areas in a local station, data are 
output in the opposite direction.)

User's manual for the master/local module used

Remote input (RX)

Bit data input from a slave station to the master station (For some areas in a local station, data are 
output in the opposite direction.)

User's manual for the master/local module used

Link device

A device (RX, RY, RWr, or RWw) in a module on CC-Link IE Field Network

Содержание NZ2GFCF-D62PD2

















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NZ2GFCF-D62PD2

Waters 2690 Quick Start Manual preview
2690
Бренд: Waters Страницы: 55
Paradox IP150 Programming Manual preview
IP150
Бренд: Paradox Страницы: 2
NEC 78K0S/KA1+ Preliminary User'S Manual preview
78K0S/KA1+
Бренд: NEC Страницы: 304
Wavelink Avalanche User Manual preview
Avalanche
Бренд: Wavelink Страницы: 69
Daikin BRC1H71W Installation Manual preview
BRC1H71W
Бренд: Daikin Страницы: 38
Daikin BRC1H71W Operation Handbook preview
BRC1H71W
Бренд: Daikin Страницы: 2
Daikin BRC1E72 Operation Manual preview
BRC1E72
Бренд: Daikin Страницы: 148
Daikin EHVH04S18CA Operation Manual preview
EHVH04S18CA
Бренд: Daikin Страницы: 12
Daktronics RC-100 Operation Manual preview
RC-100
Бренд: Daktronics Страницы: 52
Waeco RC-100 Installation And Operating Instructions Manual preview
RC-100
Бренд: Waeco Страницы: 20
Z-Wave RC-100 Operating Instructions Manual preview
RC-100
Бренд: Z-Wave Страницы: 56
Haldex PR Installation Manual preview
PR
Бренд: Haldex Страницы: 8
IBM 3746-900 Installation Manual preview
3746-900
Бренд: IBM Страницы: 276
IBM 4769 Installation Manual preview
4769
Бренд: IBM Страницы: 32
IBM 3745 Series Connection And Integration Manual preview
3745 Series
Бренд: IBM Страницы: 157
Xantrex Trace C35 Installation And Operation Manual preview
Trace C35
Бренд: Xantrex Страницы: 56
Xantrex TrueCharge 2 Owner'S Manual preview
TrueCharge 2
Бренд: Xantrex Страницы: 2
Xantrex Freedom Sequence Owner'S Manual preview
Freedom Sequence
Бренд: Xantrex Страницы: 58

Бренды по названию

Популярные бренды

Загрузить еще бренды