manualshive.com logo in svg

Mitsubishi Melsec-Q QD75D1, Руководство пользователя

Mitsubishi Melsec-Q QD75D1 - компактный модуль дискретных входов/выходов. Пользовательский руководитель доступен для бесплатного скачивания с manualshive.com. Руководство содержит подробные инструкции по установке и настройке устройства. Надежный и удобный в использовании продукт для вашей автоматизации.

Поделиться
Скачать
background image

 

WARRANTY 

Please confirm the following product warranty details before using this product. 
 

1. Gratis Warranty Term and Gratis Warranty Range 

If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsubishi occurs during use of the product 
within the gratis warranty term, the product shall be repaired at no cost via the sales representative or Mitsubishi Service 
Company. 
However, if repairs are required onsite at domestic or overseas location, expenses to send an engineer will be solely at 
the customer’s discretion.  Mitsubishi shall not be held responsible for any re-commissioning, maintenance, or testing 
on-site that involves replacement of the failed module. 

[Gratis Warranty Term] 

The gratis warranty term of the product shall be for one year after the date of purchase or delivery to a designated place. 
Note that after manufacture and shipment from Mitsubishi, the maximum distribution period shall be six (6) months, and 
the longest gratis warranty term after manufacturing shall be eighteen (18) months. The gratis warranty term of repair 
parts shall not exceed the gratis warranty term before repairs. 

[Gratis Warranty Range] 

(1)  The range shall be limited to normal use within the usage state, usage methods and usage environment, etc., which 

follow the conditions and precautions, etc., given in the instruction manual, user's manual and caution labels on the 
product. 

(2)  Even within the gratis warranty term, repairs shall be charged for in the following cases. 

1.  Failure occurring from inappropriate storage or handling, carelessness or negligence by the user. Failure caused 

by the user's hardware or software design. 

2.  Failure caused by unapproved modifications, etc., to the product by the user. 
3.  When the Mitsubishi product is assembled into a user's device, Failure that could have been avoided if functions 

or structures, judged as necessary in the legal safety measures the user's device is subject to or as necessary by 
industry standards, had been provided. 

4.  Failure that could have been avoided if consumable parts (battery, backlight, fuse, etc.) designated in the 

instruction manual had been correctly serviced or replaced. 

5.  Failure caused by external irresistible forces such as fires or abnormal voltages, and Failure caused by force 

majeure such as earthquakes, lightning, wind and water damage. 

6.  Failure caused by reasons unpredictable by scientific technology standards at time of shipment from Mitsubishi. 
7.  Any other failure found not to be the responsibility of Mitsubishi or that admitted not to be so by the user. 

 

2. Onerous repair term after discontinuation of production 

(1)  Mitsubishi shall accept onerous product repairs for seven (7) years after production of the product is discontinued. 

Discontinuation of production shall be notified with Mitsubishi Technical Bulletins, etc. 

(2)  Product supply (including repair parts) is not available after production is discontinued. 

 

3. Overseas service 

Overseas, repairs shall be accepted by Mitsubishi's local overseas FA Center. Note that the repair conditions at each FA 
Center may differ. 

 

4. Exclusion of loss in opportunity and secondary loss from warranty liability 

Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation of damages caused by any cause 
found not to be the responsibility of Mitsubishi, loss in opportunity, lost profits incurred to the user by Failures of 
Mitsubishi products, special damages and secondary damages whether foreseeable or not, compensation for accidents, 
and compensation for damages to products other than Mitsubishi products, replacement by the user, maintenance of on-
site equipment, start-up test run and other tasks. 

 

5. Changes in product specifications 

The specifications given in the catalogs, manuals or technical documents are subject to change without prior notice. 

 

Содержание Melsec-Q QD75D1



























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Melsec-Q QD75D1

ABB FPBA-01 PROFIBUS DP Quick Installation And Start-Up Manual preview
FPBA-01 PROFIBUS DP
Бренд: ABB Страницы: 2
ABB ControlMaster CM15 Instructions preview
ControlMaster CM15
Бренд: ABB Страницы: 4
Icom IC-706MKII Manual preview
IC-706MKII
Бренд: Icom Страницы: 30
ICM Controls ICM330 Manual preview
ICM330
Бренд: ICM Controls Страницы: 2
ICM Controls ICM2909 Manual preview
ICM2909
Бренд: ICM Controls Страницы: 2
ray Super Remote Setting Up preview
Super Remote
Бренд: ray Страницы: 11
National Instruments PXIe-4340 User Manual preview
PXIe-4340
Бренд: National Instruments Страницы: 31
National Instruments NI 9882 Operating Instructions Manual preview
NI 9882
Бренд: National Instruments Страницы: 24
National Instruments SCXI SCXI-1102 User Manual preview
SCXI SCXI-1102
Бренд: National Instruments Страницы: 85
National Instruments SCXI SCXI-1102 Application Note preview
SCXI SCXI-1102
Бренд: National Instruments Страницы: 10
National Instruments PXIe-4353 Calibration Procedure preview
PXIe-4353
Бренд: National Instruments Страницы: 16
National Instruments PXIe-6591R User Manual preview
PXIe-6591R
Бренд: National Instruments Страницы: 98
National Instruments CompactRIO cRIO-9002 Operating Instructions Manual preview
CompactRIO cRIO-9002
Бренд: National Instruments Страницы: 21
National Instruments cDAQ-9133 User Manual preview
cDAQ-9133
Бренд: National Instruments Страницы: 145
National Instruments cRIO-9039 User Manual preview
cRIO-9039
Бренд: National Instruments Страницы: 42
National Instruments cDAQ-9132 Safety, Environmental, And Regulatory Information preview
cDAQ-9132
Бренд: National Instruments Страницы: 8
National Instruments PXIe-5693 Calibration Procedure preview
PXIe-5693
Бренд: National Instruments Страницы: 54
Velleman VM130V2SET Quick Start Manual preview
VM130V2SET
Бренд: Velleman Страницы: 26

Бренды по названию

Популярные бренды

Загрузить еще бренды