Mitsubishi Melsec-Q QD75D1, Руководство пользователя

Страница: 688 / 858

Appendix - 2
MELSEC-Q
APPENDICES
Appendix 1 Version up of the functions
Appendix 1.1 Comparison of functions according to function versions
The following tables list the QD75 functions compared according to function versions
and the buffer memory for their additional functions.
(1) Function comparison
Function versions
QD75P N/
QD75D N
QD75P /QD75D
Item
A A B
Reference
Speed-position switching control
(ABS mode)
Section 9.2.17
Pre-reading start function Section 12.7.7
External I/O signal monitor
function
1 2
Section 13.5
Multiple programmable controller
compatible function
3
⎯
Deceleration start flag function
4
Section 12.7.8
Stop command processing for
deceleration stop function
5
Section 12.7.9
Output timing selection of near
pass control
6
7
Section 12.3.4
:Available :Not available
1: For the QD75P N/QD75D N, external I/O signals can not be monitored on GX
Developer. Use the system monitor of GX Works2.
2: Usable on GX Developer of SW6D5C-GPPW-E or later.
3: Compatible with QCPU of function version B.
4: Supported by the module whose first five digits of SERIAL No. are "03042" or later.
5: Supported by the module whose first five digits of SERIAL No. are "05072" or later.
6: Supported by the module whose first five digits of SERIAL No. are "14032" or later.
7: Supported by the module whose first five digits of SERIAL No. are "14012" or later.
(2) Additional buffer memory
Buffer memory addresses
Axis 1 Axis 2 Axis 3 Axis 4
Name Used function
34 184 334 484
Speed-position function
selection Speed-position switching
control
899 999 1099 1199 Deceleration start flag
1905
Deceleration start flag
valid
Deceleration start flag
function
1907
Stop command processing
for deceleration stop
selection Stop command processing
for deceleration stop
function