3 - 14
3 - 14
3. SPECIFICATIONS
(12) ID tag UID storage area (Un
\
G90 to Un
\
G93, Un
\
G4090 to Un
\
G4093)
This area stores the UID (individual identification number) of the ID tag with which
communication was performed.
(13) Data storage area (Un
\
G100 to Un
\
G1123, Un
\
G4100 to Un
\
G5123)
This area stores read data when reading is performed.
The area stores write data when writing is performed.
(14) Test operation mode specification area (Un
\
G8000)
This area sets the test contents to be executed.
Table 3.12 Test operation mode specification list
Setting Value
Description
0000
H
, value other below
Communication test
00A0
H
Distance level
00B0
H
Speed level (read)
00B1
H
Speed level (write)
00C0
H
Noise level
00C1
H
Communication success rate
00C2
H
＊
1
Use prohibited
*1. Use prohibited. Do not set this value. Normal operation cannot be guaranteed if
the value is set.
(15) Test operation antenna specification area (Un
\
G8001)
This area is used to specify an antenna when tests other than the communication
test are executed.
Table 3.13 Test operation antenna specification list
Setting Value
Description
0001
H
Specifies antenna 1.
0002
H
Specifies antenna 2.
Value other than the above*
1
Executes the communication test.
*1. The communication test is executed when the setting value is not properly
specified.
(16) No. of processing points during testing specification area (Un
\
G8002)
This area is used to specify the number of bytes to be executed during testing other
than the noise level test.
Table 3.14 No. of processing points during testing specification list
Setting Value
Description
0001
H
to 0800
H
Specifies the number of bytes to be executed.
Value other than the above*
1
Executes the communication test.
*1. The communication test is executed when the setting value is not properly
specified.
