2 - 2
2 - 2
2. SYSTEM CONFIGURATION
Table 2.1 Application system (Continued)
Mountable CPU Module
Mountable Quantity*
1
Mountable Base Unit*
2
CPU Type
CPU Model
Main Base Unit
Extension Base Unit
Programmable
controller CPU
Universal
model CPU
Q03UDECPU
64, maximum
○
○
Q04UDEHCPU
Q06UDEHCPU
Q10UDEHCPU
Q13UDEHCPU
Q20UDEHCPU
Q26UDEHCPU
Safety CPU
QS001CPU
Not mountable
× ×
*
3
C-language controller module
Q06CCPU-V-H01
Not mountable
× ×
Q06CCPU-V
Q06CCPU-V-B
Q12DCCPU-V
○
:Mountable,
×
:Not mountable
*1. Limited to within the range of the number of IO points of the CPU module.
*2. Mountable in any IO slot of a mountable base unit.
*3. An extension base unit cannot be connected to a safety CPU.
(b) Mounting to a MELSECNET/H remote I/O station
The table below shows the network modules and base units applicable to the
RFID interface module and quantities for each network module model.
Depending on the combination with other modules or the number of mounted
modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if the
power supply capacity is insufficient, change the combination of the modules.
Applicable network
module
No. of modules*
1
Base unit*
2
Main base unit of
remote I/O station
Extension base unit of
remote I/O station
QJ72LP25-25
Up to 64
○
○
QJ72LP25G
QJ72LP25GE
QJ72BR15
○
:Applicable,
×
:N/A
*1. Limited within the range of I/O points for network module.
*2. Can be installed to any I/O slot of a base unit.
2
