Mitsubishi MELSEC iQ-F, Руководство пользователя

Страница: 168 / 182

166
APPX
Appendix 4 Buffer Memory Areas
■
Default value
The default values are set as shown below.
CH1 Trigger setting value
Set a level to generate a level trigger.
For details on the logging function, refer to the following.

Page 59 Logging Function
■ Buffer memory address
The following shows the buffer memory address of this area.
■
Setting range
The possible setting range is from -32768 to +32767.
■
Enabling the setting
Turn off → on → off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■
Default value
The default value is set to 0.
CH1 Celsius/Fahrenheit display setting
Set the display method of 'Digital output value' (Un\G598) when ‘CH1 Input type/range setting '(Un\G598) is resistance
temperature detector or thermocouple.
Setting a value other than the above causes a Celsius/Fahrenheit display setting range error (error code: 198  H).
■
Buffer memory address
The following shows the buffer memory address of this area.
■ Default value
The default value is Celsius (0).
Channel In the normal mode In FX2N allocation function mode
Default value
(Decimal) Buffer memory area to be
monitored Default value
(Decimal) Buffer memory area to be
monitored
CH1 402 CH1 Digital operation value (Un\G402) 10 CH1 Digital operation value (Un\G10)
CH2 602 CH2 Digital operation value (Un\G602) 11 CH2 Digital operation value (Un\G11)
CH3 802 CH3 Digital operation value (Un\G802) 12 CH3 Digital operation value (Un\G12)
CH4 1002 CH4 Digital operation value
(Un\G1002) 13 CH4 Digital operation value (Un\G13)
CH5 1202 CH5 Digital operation value
(Un\G1202) 14 CH5 Digital operation value (Un\G14)
CH6 1402 CH6 Digital operation value
(Un\G1402) 15 CH6 Digital operation value (Un\G15)
CH7 1602 CH7 Digital operation value
(Un\G1602) 16 CH7 Digital operation value (Un\G16)
CH8 1802 CH8 Digital operation value
(Un\G1802) 17 CH8 Digital operation value (Un\G17)
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH  Trigger setting value 542 742 942 1142 1342 1542 1742 1942
CH  Trigger setting value (In FX2N allocation mode function) 9231 9232 9233 9234 9235 9236 9237 9238
Setting value Setting content
0 Celsius
1 Fahrenheit
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH  Celsius/Fahrenheit display setting 547 747 947 1147 1347 1547 1747 1947
CH  Celsius/Fahrenheit display setting (In FX2N allocation
mode function)
1281 1282 1283 1284 1285 1286 1287 1288