Mitsubishi MELSEC-F FX2N-1RM-E-SET, Руководство пользователя

Страница: 56 / 140

Basic Setting 6
6-6
FX
2N
-1RM-E-SET Programmable Cam Switch
6.4 Individual automatic angle advance function
The automatic angle advance function performs the output ON/OFF operation in advance with an
arbitrary angle (angle advance quantity) in accordance with the rotation speed of the resolver.
This setting does an individual setting to the on angle and the off angle of output Y00 to Y03.
The executed program number can be used from bank 0 to bank 6.
Bank 7 must not be used. (Bank 7 is used to store the data of the individual automatic angle
advance function.)
The rotational speed response is as follows.
Response speed:1degree (360 degrees/revolution) mode . . . 415 r/min
0.5 degrees (720 degrees/revolution) mode . . . 207 r/min
• The individual automatic angle advance function can be set in 7steps from S0 to S6 as
shown in the figure above. Setting the rotation speed (a to g) and the angle advance quantity
(A to G) for each step.
• Please set the smallest rotation speed to S0 and increase the settings sequentially.
(S0<S1< . . . <S6)
• The rotation speed should be 400 r/min or less (1 degree mode), 207 r/min or less (0.5
degrees mode) and the angle advance quantity should be 180 degrees or less.
• When the rotation speed is 0 (initial value), the angle advance quantity is treated as 0.
a b c d e f
g
A
B
C
D
E
F
G
180 degrees maximum
Angle
advance
quantity
(degrees)
S0
S1
S2
S3
S4
S5
S6
400r/min (1 degree mode)
207r/min (0.5degrees mode)
Rotation speed (r/min)
maximum