BFM
Contents
*# 0
Channel initialization Default = H0000
*# 1
Channel 1
Contains the number of samples (1 to 4096) to
be used for an averaged result. The default
setting for normal speed is 8.
The default setting for high speed is 1.
*# 2
Channel 2
*# 3
Channel 3
*# 4
Channel 4
# 5
Channel 1
These buffer memories contain the averaged
input values for the number of samples entered
for the channel in buffer memories #1 to #4
respectively.
# 6
Channel 2
# 7
Channel 3
# 8
Channel 4
# 9
Channel 1
These buffer memories contain the present
value currently being read by each input
channel.
#10
Channel 2
#11
Channel 3
#12
Channel 4
#13-#14 Reserved
#15
When set to 0, a normal speed is selected of
15ms/ch (default)
When set to 1, a high speed is selected of
6ms/ch
#16-#19 Reserved
3.4 Allocation of buffer memories (BFM)
In buffer memory locations (BFMs) marked
with an "*" data can be written from the PC
using the TO command.
For buffer memories (BFMs) without the "*"
mark, data can be read to the PC using the
FROM command.
Before reading from the analog special
function block, ensure these settings have
been sent to the analog special function
block. Otherwise, the previous values held
in the analog block will be used.
The buffer memory also gives a facility to
adjust offset and gain by software as well
as by panel switches of the FX-4AD unit.
(see note 3)
Offset (intercept): The analog input value
when the digital output becomes 0.
Gain (slope): The analog input value when
the digital output b1000.
BFM
b7 b6 b5 b4 b3 b2 b1 b0
*#20
Reset to Defaults and Preset. Default=0
*#21
Offset, Gain Adjust Prohibit. Default=(0,1)Permit
*#22
Offset, Gain Adjust
G4 O4 G3 O3 G2 O2 G1 O1
*#23
Offset Value Default=0
*#24
Gain Value Default=5,000
#25-#28 Reserved
#29
Error status
#30
Identification code K2010
#31
Cannot be used
Selection of A-D
c o n v e r s i o n
speed see note 2
