Mitsubishi LANCER EVOLUTION-IV 1998, Руководство по ремонту, Страница: 441 / 526

REAR SUSPENSION –
Lower Arm and Toe Control Arm Assemblies
REAR SUSPENSION –
Lower Arm and Toe Control Arm Assemblies
34-10
LOWER ARM AND TOE CONTROL ARM ASSEMBLIES
REMOVAL AND INSTALLATION
Post-installation Operation
(1) Check the Toe Control Arm Ball Joint Dust Cover
for Cracks or Damage by Pushing it with Finger
(2) Wheel Alignment Check and Adjustment
(Refer to P.34-3.)
1
2
3
4
5
6
Unit: Nm {kgf
@
m}
93 {9.5}*
88 {9.0}*
74 – 87 {7.5 – 8.9}*
88 {9.0}*
93 {9.5}*
2
Lower arm assembly removal steps
1. Lower arm assembly and shock
absorber connecting bolt
A
A
"
2. Lower arm assembly mounting bolt
"
A
A
3. Lower arm assembly
Toe control arm assembly removal
steps
A
B
"
4. Toe control arm and knuckle
connection
A
C
"
5. Toe control arm assembly mounting
bolt
6. Toe control arm assembly
Caution
The part marked with * should be first temporarily
tightened, then torqued to specification with the
vehicle on the ground in unloaded condition.
REMOVAL SERVICE POINTS
A
A
"
LOWER ARM ASSEMBLY MOUNTING BOLT
REMOVAL
Place mating marks on the lower arm and the eccentric cam
bolt before removal.
Mating marks