Mitsubishi i-MiEV 2011, Руководство пользователя

Страница: 83 / 193

NOTE
l When adjusting the beam position, first put
the dial in the “0” position (the highest beam
position).
Vehi-
cle
condi-
tion
Switch
posi-
tion
“0” “0” “1” “1” “2”
•: 1 person
:Full luggage loading
Switch position 0- Driver only/Driver + 1 front
passenger
Switch position 1- 4 passengers (including driv-
er)/
4 passengers (including driv-
er) + Full luggage loading
Switch position 2- Full luggage loading
Turn-signal lever
E00506501459
1- Turn-signals
When making a normal turn, use position
(1). The lever will return automatically when
cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to
change a lane, the turn-signal lamps and indi-
cation lamp in the instrument cluster will on-
ly flash while the lever is operated.
Also, when you move the lever to (2) slight-
ly then release it, the turn-signal lamps and in-
dication lamp in the instrument cluster will
flash 3 times.
NOTE
l
If the lamp flashes unusually quickly, the
bulb in a turn-signal lamp may have burned
out. We recommend you to have the vehicle
inspected.
l
It is possible to activate the following func-
tions. For further information, we recom-
mend you to consult a MITSUBISHI
MOTORS Authorized Service Point.
• Flashing of the turn-signal lamps when
the lever is operated with the electric mo-
tor switch in the “ACC” position
• The turn-signal lamps 3-flash function
for lane changes can be deactivated.
• The time required to operate the lever for
the 3-flash function can be adjusted.
Instruments and controls
4-14
4