Mitsubishi i-MiEV 2011, Руководство пользователя

Страница: 45 / 193

Folding the seatbacks forward
E00401600330
Larger objects can be loaded into the vehicle if a
seatback is folded forward.
CAUTION
l Do not stack luggage in the vehicle higher
than the seatback height. Also, firmly se-
cure the luggage.
Serious accidents could result due to un-
restrained objects entering the passenger
compartment during sudden braking.
To fold
Pull the lever, and fold the rear seatbacks forward.
NOTE
l
Do not operate the lever in the wrong direc-
tion.
Doing so could damage the lever and make it
impossible to operate the seatback.
To replace
1. Raise the seatback until it locks securely into
place.
2. Push lightly on the seatback to confirm that
it has actually been secured.
Rear seat cushion
E00401900173
The rear seat cushion can be removed. It is re-
moved when the tyre repair kit stored under the
seat cushion is taken out. Use this function when
putting the seat covers on, etc.
To remove
1. Pull the seat stoppers (A) to unlock the seat
cushion (B).
2. Lift up the seat cushion and pull it towards
you to remove it.
To install
1. Place the seat belt’s buckles on top of the
seat cushion.
2. Pushing the seat cushion as far back as possi-
ble, press the hooks (A) on the underside of
the seat cushion into the right and left stop-
per installation holes (B) until a click is heard.
3. After installing the seat cushion, shake it light-
ly to check that it is properly fixed in position.
Seat and seat belts
3-06
3