This manual confers no industrial property rights or any rights of any other kind,
nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be
held responsible for any problems involving industrial property rights which may
occur as a result of using the contents noted in this manual.
Warranty
Mitsubishi will not be held liable for damage caused by factors found not to be
the cause of Mitsubishi; opportunity loss or lost profits caused by faults in the
Mitsubishi products; damage, secondary damage, accident compensation
caused by special factors unpredictable by Mitsubishi; damages to products
other than Mitsubishi products; and to other duties.
For safe use
This product has been manufactured as a general-purpose part for general
industries, and has not been designed or manufactured to be incorporated in
a device or system used in purposes related to human life.
Before using the product for special purposes such as nuclear power, electric
power, aerospace, medicine or passenger movement vehicles, consult with
Mitsubishi Electric.
This product has been manufactured under strict quality control. However
when installing the product where major accidents or losses could occur if the
product fails, install appropriate backup or failsafe functions in the system.
•
•
•
HEAD OFFICE
HIMEJI WORKS
: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310,
JAPAN
: 840, CHIYODA CHO, HIMEJI, JAPAN
Side
B
Side
A
Side
B
JAPANESE
ENGLISH
JY997D32901A
Safety Precaution
(Read these precautions before using.)
Before using this product, please read this manual and the relevant manuals introduced
in this manual carefully and pay full attention to safety to handle the product correctly.
The precautions given in this manual are concerned with this product.
In this manual, the safety precautions are ranked as "DANGER" and "CAUTION".
Depending on circumstances, procedures indicated by "CAUTION" may also be
linked to serious results.
In any case, it is important to follow the directions for usage.
Indicates that incorrect handling may cause hazardous
conditions, resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous
conditions, resulting in medium or slight personal injury
or physical damage.
DESIGN PRECAUTIONS
•
Some failures of the GOT or cable may keep the outputs on or off.
An external monitoring circuit should be provided to check for output signals
which may lead to a serious accident.
Not doing so can cause an accident due to false output or malfunction.
•
If a communication fault (including cable disconnection) occurs during
monitoring on the GOT, communication between the GOT and PLC CPU is
suspended and the GOT becomes inoperative.
A system where the GOT is used should be configured to perform any
significant operation to the system by using the switches of a device other
than the GOT on the assumption that a GOT communication fault will occur.
Not doing so can cause an accident due to false output or malfunction.
•
Do not use the GOT as the warning device that may cause a serious accident.
An independent and redundant hardware or mechanical interlock is required to
configure the device that displays and outputs serious warning.
Failure to observe this instruction may result in an accident due to incorrect
output or malfunction.
•
Incorrect operation of the touch switch(s) may lead to a serious accident if the
GOT backlight is gone out.
When the GOT backlight goes out, causes the monitor screen to appear
blank, while the input of the touch switch(s) remains active.
This may confuse an operator in thinking that the GOT is in "screensaver"
mode, who then tries to release the GOT from this mode by touching the
display section, which may cause a touch switch to operate.
DESIGN PRECAUTIONS
•
Do not bundle the control and communication cables with main-circuit, power
or other wiring.
Run the above cables separately from such wiring and keep them a minimum
of 100mm (3.94in.) apart.Not doing so noise can cause a malfunction.
MOUNTING
PRECAUTIONS
•
Be sure to shut off all phases of the external power supply used by the
system before mounting or removing the GOT to/from the panel.
Not doing so can cause the unit to fail or malfunction.
•
When installing the battery wear an earth band etc. to avoid the static electricity.
The static electricity can cause the unit to fail or malfunction.
MOUNTING PRECAUTIONS
•
Use the GOT in the environment that satisfies the general specifications
described in this manual. Not doing so can cause an electric shock, fire,
malfunction or product damage or deterioration.
•
When mounting the GOT to the control panel, tighten the mounting screws in the
specified torque range. Undertightening can cause the GOT to drop, short circuit
or malfunction. Overtightening can cause a drop, short circuit or malfunction due
to the damage of the screws or the GOT.
WIRING PRECAUTIONS
•
Be sure to shut off all phases of the external power supply used by the system
before wiring. Failure to do so may result in an electric shock, product damage or
malfunctions.
•
Please make sure to ground FG terminal of the GOT power supply section by
applying 100 or less which is used exclusively for the GOT. Not doing so may
cause an electric shock or malfunction.
•
Correctly wire the GOT power supply section after confirming the rated voltage
and terminal arrangement of the product. Not doing so can cause a fire or failure.
•
Tighten the terminal screws of the GOT power supply section in the specified
torque range. Undertightening can cause a short circuit or malfunction.
Overtightening can cause a short circuit or malfunction due to the damage of the
screws or the GOT.
•
Exercise care to avoid foreign matter such as chips and wire offcuts entering the
GOT. Not doing so can cause a fire, failure or malfunction.
WIRING PRECAUTIONS
•
Plug the communication cable into the connector of the connected unit and
tighten the mounting and terminal screws in the specified torque range.
Undertightening can cause a short circuit or malfunction. Overtightening can
cause a short circuit or malfunction due to the damage of the screws or unit.
TEST OPERATION
PRECAUTIONS
•
Before performing the test operations of the user creation monitor screen (such as
turning ON or OFF bit device, changing the word device current value, changing
the settings or current values of the timer or counter), read through the manual
carefully and make yourself familiar with the operation method.
During test operation, never change the data of the devices which are used to
perform significant operation for the system. False output or malfunction can
cause an accident.
STARTUP/MAINTENANCE
PRECAUTIONS
•
When power is on, do not touch the terminals.
Doing so can cause an electric shock or malfunction.
•
Connect the battery correctly.
Do not discharge, disassemble, heat, short, solder or throw the battery into the fire.
Incorrect handling may cause the battery to generate heat, burst or take fire,
resulting in injuries or fires.
•
Before starting cleaning or terminal screw retightening, always switch off the
power externally in all phases. Not switching the power off in all phases can cause
a unit failure or malfunction. Undertightening can cause a short circuit or
malfunction. Overtightening can cause a short circuit or malfunction due to the
damage of the screws or unit.
STARTUP/MAINTENANCE
PRECAUTIONS
•
Do not disassemble or modify the unit.
Doing so can cause a failure, malfunction, injury or fire.
•
Do not touch the conductive and electronic parts of the unit directly.
Doing so can cause a unit malfunction or failure.
•
The cables connected to the unit must be run in ducts or clamped.
Not doing so can cause the unit or cable to be damaged due to the dangling,
motion or accidental pulling of the cables or can cause a malfunction due to a
cable connection fault.
•
When unplugging the cable connected to the unit, do not hold and pull the cable
portion. Doing so can cause the unit or cable to be damaged or can cause a
malfunction due to a cable connection fault.
•
Do not drop or apply any impact to the battery.
If any impact has been applied, discard the battery and never use it.
The battery may be damaged by the drop or impact.
•
Before touching the unit, always touch grounded metal, etc. to discharge static
electricity from human body, etc.
Not doing so can cause the unit to fail malfunction.
DISPOSAL PRECAUTIONS
•
When disposing of the product, handle it as industrial waste.
Compliance with EC directive (CE Marking)
This note does not guarantee that an entire mechanical module produced in
accordance with the contents of this note will comply with the following standards.
Compliance to EMC directive for the entire mechanical module should be checked by
the user / manufacturer. For more details please contact the local Mitsubishi Electric
sales site.
Requirement for Compliance with EMC directive
The following products have shown compliance through direct testing (to the
identified standards) and design analysis (forming a technical construction file) to the
European Directive for Electromagnetic Compatibility (89/336/EEC) when used as
directed by the appropriate documentation.
Type :Programmable Controller (Open Type Equipment)
For more details please contact the local Mitsubishi Electric sales site.
Notes for compliance to EMC regulation
1) General notes on the use of communication cables
Any device which utilizes a data communication function is susceptible to the
wider effects of local EMC noise. Therefore, when installing any communication
cables care should always be taken with the routing and location of those cables.
The GOT units identified on the previous chapter are compliant with the EMC
requirement when the following communication cables are used.
2) General notes on Power supply
The GT1045-QSBD and GT1040-QBBD unit
requires an additional ferrite filter to be
attached to the 24V DC power supply
cables. The filter should be attached in a
similar manner as shown in the figure
opposite, i.e. the power cables are wrapped
around the filter. However, as with all EMC
situations the more correctly applied
precautions the better the systems Electro-
m a g n e t i c C o m pa t i b i l i t y. T h e f e r r i t e
recommended is a TDK ZCAT3035-1330 or
similar. The ferrite should be placed as near
to the 24V DC terminals of the GT1045-
QSBD and GT1040-QBBD as possible
(which should be within 75mm of the GOT
terminal).
Associated Manuals
The following manuals are relevant to this product. When these loose manuals are
required, please consult with our local distributor.
*1 Stored in the GT Works 2/GT Designer2 in PDF format.
For details of a PLC to be connected, refer to the PLC user's manual respectively.
Bundled Items
TRANSPORTATION
PRECAUTIONS
•
Before transporting the GOT, turn the GOT power on and check that the battery
voltage status is normal on the Time setting & display screen (utilities screen). In
addition, confirm that the adequate battery life remains on the rating plate.
Transporting the GOT with the low battery voltage or the battery the reached
battery life may unstabilize the backup data unstable during transportation.
•
Make sure to transport the GOT main unit and/or relevant unit(s) in the manner
they will not be exposed to the impact exceeding the impact resistance
described in the general specifications of this manual, as they are precision
devices. Failure to do so may cause the unit to fail.
Check if the unit operates correctly after transportation.
Standard
Remark
EN61131-2 : 2003
Programmable
controllers- Equipment,
requirement and tests
EMI
Compliance with all relevant aspects of the
standard.
(Radiated Emissions)
EMS
Compliance with all relevant aspects of the
standard.
(ESD, RF electromagnetic field, EFTB, Surge, RF
conducted disturbances and Power frequency
magnetic field)
GOT Unit
Existing Cables
User Made Cables
GT1045-QSBD
and
GT1040-QBBD
GT01-C30R4-8P
modified as
shown in EX.1
Those cables need to be independently
tested by the user to demonstrate EMC
compatibility when they are used with
M i t s u b i s h i G O T u n i t a n d F X
3 U
Programmable Controllers.
100mm
250mm
140mm
GT01-C30R4-8P
Comes equipped
Added by user
GOT units
F = Ferrite core
Ex. NEC TOKIN - ESD-R-17S or similar
Programmable
controller
Added by user
(9.84inch)
(3.93inch)
(5.51inch)
Ex.1
F
F
F
Manual name
Contents
Manual Number
(Model Code)
GT10 User's Manual
(sold separately)
Describes the GT10 hardware-relevant
content such as part names, external
dimensions, mounting, power supply
wiring, specifications, and introduction
to option devices
JY997D24701
(09R819)
GOT1000 Series
Connection Manual
1/3, 2/3, 3/3
(sold separately)
*1
Describes system configurations of the
connection method applicable to
GOT1000 series and cable creation
method
SH-080532ENG
(1D7M26)
GT Designer2 Version2
Basic Operation/Data
Transfer Manual
(For GOT1000 Series)
(sold separately)
*1
D e s c r i b e s m e t h o d s o f t h e GT
Designer2 installation operation, basic
operation for drawing and transmitting
data to GOT1000 series
SH-080529ENG
(1D7M24)
GT Designer2 Version2
Screen Design Manual
(For GOT1000 Series)
1/3, 2/3, 3/3
(sold separately)
*1
Describes specifications and settings
of the object functions used in GT
Designer2
SH-080530ENG
(1D7M25)
Model Name
Remark
GT1045-QSBD
GOT main unit
(The maintenance supplies below are packed with the product.)
GT1040-QBBD
Maintenance Supplies
Quantity
Panel Mounting Bracket (with M4
×
20 screws)
4
Panel Mounting Packing
1
GT10 General Description (This manual)
1
TDK
Up to
75mm
(2.95inch)
Explanation of the GOT model name
GT10 4 0 -
* * * *
0:Monochrome(black/white)
5:256 colors supported
GOT1000 series
GT10
Screen size type
Display color type
Display device type
B:Black
Power type
Panel color type
D:24VDC
L:5VDC
4:4.7"
3:4.5"
5:5.7"
2:3.7"
L:STN monochrome(black/white)
B:STN monochrome(blue/white)
S:STN color
Resolution
Blank:less than 320
×
240
Q:320
×
240(QVGA)
1. Specifications
1.1 General Specifications
*1 Do not use or store the GOT under pressure higher than the atmospheric pressure of altitude 0m (0ft.). Failure to observe this instruction may cause a malfunction.
*2 This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the
machinery within the premises.
Category II applies to equipment for which electrical power is supplied from fixed facilities.
The surge voltage withstand level for up to the raged voltage of 300 V is 2500 V.
*3 This index indicates the degree to which conductive material is generated in the environment where the equipment is used.
In pollution degree 2, only non-conductive pollution occurs but temporary conductivity may be produced due to condensation.
1.2 Performance Specifications
Item
Specifications
GT1045-QSBD/GT1040-QBBD
Operating ambient
temperature
Display section
0 to 50
°
C
Other than display section 0 to 55
°
C (When mounted horizontally), 0 to 50
°
C (When mounted vertically)
Storage ambient temperature
-20 to 60
°
C
Operating ambient humidity
10 to 90% RH, non-condensing (The wet bulb temperature is 39
°
C or less.)
Storage ambient humidity
10 to 90% RH, non-condensing (The wet bulb temperature is 39
°
C or less.)
Vibration resistance
Conforms to JIS
B3502 and
IEC61131-2
Frequency
Acceleration
Half-amplitude
Sweep Count
Under intermittent
vibration
5 to 9Hz
--
3.5mm
10 times each in X,
Y and Z directions
9 to 150Hz
9.8m/s
2
--
Under continuous
vibration
5 to 9Hz
--
1.75mm
9 to 150Hz
4.9m/s
2
--
Shock resistance
Conforms to JIS B3502, IEC 61131-2 (147m/s
2
, 11 ms, Sine half-wave pulse, 3 times each in the X, Y, and Z directions.)
Operating atmosphere
Must be free of lamp black, corrosive gas, flammable gas, or excessive amount of electroconductive dust particles and
must be no direct sunlight. (Same as for saving)
Operating altitude
*1
2000 m (6562 ft) max.
Installation location
Inside control panel
Overvoltage category
*2
II or less
Pollution degree
*3
2 or less
Cooling method
Self-cooling
Grounding
Class D grounding (100
Ω
or less). To be connected to the panel when grounding is not possible
Item
Specifications
GT1045-QSBD
GT1040-QBBD
Display
section
*1
Type
STN color liquid crystal
STN monochrome (white/blue) liquid crystal
Screen size
4.7"
Resolution
320
×
240 dots (Horizontal format)
Display size
W96(3.77)
×
H72(2.83) [mm](inch) (Horizontal format)
Display character
16-dot standard font: 40 characters
×
15 lines, 12-dot standard font: 53 characters
×
20 lines (Horizontal format)
Display color
256 colors
Monochrome (white/blue), 16 scales
Display angle
Left/Right: 50 degrees, Top: 40 degrees, Bottom: 70 degrees
(Horizontal format)
Left/Right: 45 degrees, Top: 20 degrees, Bottom: 40 degrees
(Horizontal format)
Contrast adjustment
16-level adjustment
Intensity of LCD only
150 [cd/m
2
]
300 [cd/m
2
]
Life
Approx. 50,000h. (Time for display intensity to become 1/5 at operating ambient temperature of 25
°
C)
Backlight
LED Backlight off/screen saving time can be set.
Touch
panel
Number of touch keys
Maximum 50 keys/screen (Matrix resistive film touch panel)
Key size
Minimum 16
×
16 dots (per key)
Simultaneous pressing of
two (or more) areas
(2-point press)
Enable
Life
1 million times or more (operating force 0.98N max.)
Memory
User memory
*2
Flash memory ROM (Internal), for storing project data (3M bytes or less) and OS
Life
(Number of write times)
100,000 times
Battery
GT11-50BAT lithium battery
Backup target
Clock data, alarm history and recipe data
Life
Approx. 5 years (Operating ambient temperature of 25)
Buzzer output
(a buzzer that sounds when touch
keys are pressed)
Single tone (LONG/ SHORT/ OFF adjustable)
Environmental protective structure
*3
Equivalent to IP67 (JEM1030) (front section)
External dimensions
W139(5.47)
×
H112(4.4)
×
D41(1.61)[mm](inch) (Excluding mounting fixtures) (Horizontal format)
*1 Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel. It is impossible to completely avoid this symptom, as the liquid crystal display
comprises of a great number of display elements. Flickers may be observed depending on the display color.
Please note that these dots appear due to its characteristic and are not caused by product defect.
When the same screen is displayed for a long time, an incidental color or partial discoloration is generated on the screen due to heat damage, and it may not disappear.
To prevent heat damage, the screen saver function is effective.
For details on the screen saver function, refer to the following.
→
GT10 User's Manual
*2 ROM in which new data can be written without deleting the written data.
*3 Note that this does not guarantee all users' operation environment.
1.3 Power Supply Specifications
(
For details on power supply wiring, such as the allowable cable size and tightening
torque, refer to the additional manual, "GT10 User's Manual".)
*1 The GOT continues to operate even upon 5ms or shorter instantaneous
power failure.
The GOT stops operating if there is extended power failure or voltage drop,
while it automatically resumes operation as soon as the power is restored.
Built-in
interface
RS-422
RS-422 1ch
Transmission speed: 115,200/57,600/38,400/19,200/9,600/4,800bps
Connector shape
: D-sub 9-pin (Female)
Application
: PLC communication
RS-232
RS-232 1ch
Transmission speed : 115,200/57,600/38,400/19,200/9,600/4,800bps
Connector shape
: D-sub 9-pin (Male)
Application
: PLC communication, bar code reader connection, PC communication
(Project data upload/download, OS installation, transparent function)
USB
USB (Full Speed 12Mbps) 1ch
Connector shape: Mini-B (Receptacle)
Application: PC communication (Project data upload/download, OS installation, transparent function)
GT10-50FMB
For connecting GT10-50FMB memory board
Panel cutting dimensions
W130 (5.11”)
×
H103(4.05”) [mm] (inch) (Horizontal format)
Weight
0.45kg (Excluding mounting fixtures)
Compatible software package
GT Designer2 Version 2.85P or later
Item
Specifications
GT1045-QSBD
GT1040-QBBD
Item
Specifications
GT1045-QSBD
GT1040-QBBD
Input power supply
voltage
24VDC (+10% -15%)
Fuse (built-in, not
exchangeable)
1.0A
Power
consumption,
(At backlight off)
3.6W (150mA/24VDC) or less,
(2.9W (120mA/24VDC) or less)
Inrush current
15A or less (26.4VDC) 2ms
Permissible
instantaneous
power failure time
*1
Within 5ms
Noise immunity
Noise voltage: 1000Vp-p, Noise width: 1
µ
s (by noise
simulator of 30 to 100Hz noise frequency)
Dielectric withstand
voltage
500VAC for 1 minute (across power supply terminals and
earth)
Insulation
resistance
10M
Ω
or larger by insulation resistance tester (across power
supply terminals and earth)
GT1045-QSBD, GT1040-QBBD
GT10 General Description
This manual describes the specifications of the product. Before use, read this
manual and manuals of relevant products fully to acquire proficiency in handling
and operating the product. Make sure to learn all the product information, safety
information, and precautions.
And, store this manual in a safe place so that you can take it out and read it
whenever necessary. Always forward it to the end user.
Registration
The company name and the product name to be described in this manual are
the registered trademarks or trademarks of each company.
Effective Aug 2008
Specifications are subject to change without notice.
©
2008 Mitsubishi Electric Corporation
Manual Number
JY997D32901A
Date
Aug 2008
