(ii)
Safety Precautions
(Read these precautions before use.)
2. INSTALLATION PRECAUTIONS
3. WIRING PRECAUTIONS
Reference
Page
• Make sure to cut off all phases of the power supply externally before attempting installation or
wiring work.
Failure to do so may cause electric shock.
23
Reference
Page
• Use the product within the generic environment specifications described in the PLC main unit
manual (Hardware Edition).
Never use the product in areas with dust, oily smoke, conductive dusts, corrosive gas (salt air, Cl
2
,
H
2
S, SO
2
, or NO
2
), flammable gas, vibration or impacts, or exposed to high temperature,
condensation, or wind and rain.
If the product is used in such conditions, electric shock, fire, malfunction, deterioration or damage
may occur.
• Install the product securely using a DIN rail or mounting screws.
• Install the product on a flat surface.
If the mounting surface is rough, undue force will be applied to the PC board, thereby causing
nonconformities.
• When drilling screw holes or wiring, make sure cutting or wire debris does not enter the ventilation
slits.
Failure to do so may cause fire, equipment failures or malfunctions.
• Be sure to remove the dust proof sheet from the PLC's ventilation port when the installation work is
completed.
Failure to do so may cause fire, equipment failures, and malfunctions.
• Do not touch the conductive parts of the product directly to avoid failure or malfunctions.
23
Reference
Page
• Cut off all phases of the power supply externally before installation or wiring work in order to avoid
damage to the product or electric shock.
27
Reference
Page
• When drilling screw holes or wiring, make sure cutting or wire debris does not enter the ventilation
slits.
Failure to do so may cause fire, equipment failures or malfunctions.
27
Содержание FX3U-32DP
Страница 1: ...USER S MANUAL FX3U 32DP PROFIBUS DP Interface Block ...
Страница 2: ......
Страница 6: ... iv ...
Страница 73: ......