Mitsubishi FX2N-64CL-M, Руководство пользователя

Страница: 66 / 94

FX2N-64CL-M CC-Link/LT Master Block Model Assignment of Buffer Memory 10
10-6
10.2.5 Number of required input blocks [BFM #20 (14h)]
The number of input blocks (8 points/block) required to assign the I/O numbers of remote
stations is stored here.
10.2.6 Number of required output blocks [BFM #21 (15h)]
The number of output blocks (8 points/block) required to assign the I/O numbers of remote
stations is stored here.
10.2.7 Data link final station information [BFM #22 (16h)]
The final station number available in the data link is stored here.
(The available final station number is set by the station information stored in the EEPROM.)
If the final station number is specified as reserved station, the reserved station is included.
10.2.8 External switch information [BFM #26 (1Ah)]
The DIP switch setting (at the time of power ON) is stored here.
Each bit number of the DIP switch is assigned to each bit of the buffer memory [BFM #26
(1Ah)]. The ON/OFF status of each bit of the DIP switch is indicated by the 0 (OFF)/1 (ON)
status of each bit of the buffer memory.
0 (OFF): The bit of the DIP switch is OFF. 1 (ON): The bit of the DIP switch is ON.
Bit Bit No. of DIP switch Description
b0 Bit 1
The setting of each bit of the DIP switch is stored.
0: The bit of the DIP switch is OFF.
1: The bit of the DIP switch is ON.
b1 Bit 2
b2 Bit 3
b3 Bit 4
b4 Bit 5
b5 Bit 6
b6 Bit 7
b7 Bit 8
b8 to b15 (Prohibited to use) --