Mitsubishi FX-10GM, Руководство пользователя

Страница: 12 / 16

FX-10GM POSITIONING CONTROLLER
2-2
SPECIFICATIONS 2
2.2.2 Service power supply
• The drive power supply of the FX-10GM is 24V DC. There is no 24V DC service
power supply for an external unit.
• When a programmable controller is used, extension blocks can be connected.
The maximum total input and output points for non powered extension blocks is
48.
• The capacity of the 5V DC power supply for special extension blocks (such as
the FX-2DA/4AD analog block, the FX-1HC high-speed counter, etc.) is 100 mA.
• When more than 48 I/O points are needed or when the capacity of the 5 V power
supply is insufficient, use powered extension units.
2.3 Performance Specifications
Item Specifications
Number of control axes 1
Applicable
programmable controller Bus connection with FX/FX2C Series PC, Number of I/O
points occuupied:8 points
Program memory 3.8k step EEPROM built in
Positioning units
(incremental / absolute)
Command units:0.001,0.01,0.1mm(deg),0.1inch
or 1,10,100,1000PLS
Max. command value: ±999,999(indirectly specified:32 bits)
Cumulative address ±2,147,483,647pulses
Speed commands
200kPPS max.,153,000cm/min
Automatic trapezoidal pattern acceleration / deceleration
Zero return
Manual or automatic dog type machine zero return (with the
dog search function). Automatic electrical zero return in
accordance with the electrical zero position setting is possible.
Absolute position
detection When using the MR-H or the MR-J2A servo motor, simple
absolute pposition detection is possible.