71/79
BCN-P5999-1305-1c
7.5.1 Controller Setting of GOT
(1) Controller Setting
Item
Set Value
Remarks
Manufacturer
MITSUBISHI ELECTRIC
Controller Type
MELSEC iQ-R, RnMT/NC/RT,CR800-D
I/F
Ethernet: Multi
(2) Detail Setting
Item
Set Value
Remarks
GOT NET No.
1
GOT Station
18
GOT Communication Port No.
5001
Retry (Times)
3
Startup Time (Sec)
3
Timeout Time (Sec)
3
Delay Time (ms)
0
(3) GOT Ethernet Setting
Item
Set Value
Remarks
Update GOT Ethernet Standard Port
Setting
Checked
GOT IP Address
192.168.3.18
Subnet Mask
255.255.255.0
Default Gateway
0.0.0.0
Peripheral S/W Communication Port No.
5015
Transparent Port No.
5014
(4) Connected Ethernet Controller Setting
Host
Net No.
Station
Unit Type
IP Address
Port No.
Communication
1
*
1
1
RCPU
192.168.3.39
5006
UDP
(5) Routing Information Settings
Routing information setting is required in order to connect to a different network. Set as below.
Transfer Net No.
Relay Net No.
Relay Station No.
CH1
2
1
1
7.5.2 PLC Side Settings (GX Works3)
(1) Select [Parameter]-[Module Information] and add RJ71GN11-T2.
Set the station type and network number under [Required Settings] - [Station Type].
Item
Set Value
Remarks
Station Type
Master Station
Network No.
2
IP Address
192.168.4.253
(2) Set the network configuration under [Basic Settings] - [Network Configuration Settings].
For detail, please refer to the user’s manual of the devices in use.
