45
I/O SIGNAL LIST
6
("n" indicates a value determined according to the station number setting.)
*1
Signal names are initial values. Using
Pr. 180
to
Pr. 186, Pr. 188,
and
Pr .189
, you can change input signal functions.
Signals of the RYn0, RYn1, and RYn9 can not be changed. Even when changed using
Pr. 178, Pr. 179,
and
Pr. 187
,
the settings are invalid.
Refer to the inverter manual (applied) for details of
Pr. 178
to
Pr. 189
.
*2
Signal names are initial values. Using
Pr. 190
to
Pr .196
, you can change output signal functions.
Refer to
page 58
for signals which can be assigned.
*3
Output signal can be assigned using
Pr. 313 to Pr. 315
.
Refer to
page 58
for signals which can be assigned.
RY(n+1)0
to
RY(n+1)7
Reserved
RX(n+1)0
to
RX(n+1)7
Reserved
RY(n+1)8 Not used
(initial data process completion flag)
RX(n+1)8 Not used
(initial data process request flag)
RY(n+1)9 Not used
(initial data process request flag)
RX(n+1)9 Not used
(initial data process completion flag)
RY(n+1)A Error reset request flag
RX(n+1)A Error status flag
RY(n+1)B
to
RY(n+1)F
Reserved
RX(n+1)B Remote station ready
RX(n+1)C
to
RX(n+1)F
Reserved
Device
No
Signal
Refer
to
Page
Device
No
Signal
Refer
to
Page
