Mitsubishi A2USCPU(S1), Руководство пользователя

Страница: 188 / 272

11 - 21
TROUBLESHOOTING 11.
Table 11.1
Error Code List for the AnUCPU, A2US(H)CPU, A2ASCPU and A2USH board (Continue)
Error Massage
Error
Code
(D9008)
Detailed
Error
Code
(D9091)
CPU
States
Error and Cause
"OPERATION
ERROR"
(Checked at
execution of
instruction.)
50 501 Stop or
Continue
(set by
parameter)
(1) When file registers (R) are used,
operation is executed outside of
specified ranges of device numbers
and block numbers of file registers
(R).
(2) File registers are used in the
program without setting capacity of
file registers.
Read the error step using a peripheral
device and check and correct program of
the step.
502 Combination of the devices specified by
instruction is incorrect.
503 Stored data or constant of specified
device is not in the usable range.
504 Set number of data to be handled is out
of the usable range.
505 (1) Station number specified by the
, ,
instructions is not a local
station.
(2) Head I/O number specified by the
, ,
instructions is not of a
remote station.
506 Head I/O number specified by the
, ,
instructions is not of a special
function module.
507 (1) When the AD57(S1) or AD58 was
executing instructions in divided
processing mode, other instructions
were executed to either of them.
(2) When an AD57(S1) or AD58 was
executing instructions in divided
processing mode, other instructions
were executed in divided mode to
another AD57(S1) or AD58.
Read the error step using a peripheral
device and provide interlock with special
relay M9066 or modify program structure
so that, when the AD57(S1) or AD58 is
executing instructions in divided
processing mode, other instructions may
not be executed to either of them or to
another AD57(S1) or AD58 in divided
mode.
508 A CC-Link dedicated command was
issued to three or more CC-Link
modules. The CC-Link dedicated command can be
issued only to two or less CC-Link
modules.
LEDA/BLRDP LEDA/BLWTP
LRDP
LWTP
LEDA/BRFRP LEDA/BRTOP RFRP
RTOP
LEDA/BRFRP LEDA/BRTOP RFRP
RTOP