Mitsubishi 00JCPU, Руководство пользователя

Страница: 496 / 542

10 - 12
(6) Function execution time in END processing
This is the time required for updating calender, clearing error in END processing, or checking the memory.
(a) Calendar update processing time
When the clock data set request (SM210 changes from off to on) or the clock data read request (SM213 turns
on) is issued, the processing time for changing or reading the clock data is required in END processing.
(b) Error clear processing time
Upon the rising edge (changes from off to on) of SM50 (Error reset), the processing time for clearing the
continuation error stored in SD50 is required.
(c) Memory check processing time
When the "Check Program memory" parameter is selected in the PLC RAS(2) tab of the PLC parameter dialog
box, the following processing time is required.
[Processing time required]
*1: Indicates the number of steps set in the PLC RAS(2) tab of the PLC parameter dialog box. ( Section 8.1.2(5))
Table10.10 Calendar update processing time
CPU module
Processing time in END processing
When the clock data set
request is issued
When the clock data read
request is issued
Q00JCPU 1.25ms 0.04ms
Q00CPU 0.99ms 0.03ms
Q01CPU 0.98ms 0.02ms
Q02CPU 0.26ms 0.01ms
Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU
0.11ms 0.005ms Q02PHCPU, Q06PHCPU, Q12PHCPU, Q25PHCPU
Q12PRHCPU, Q25PRHCPU
Table10.11 Error clear processing time
CPU module
Processing time in END processing
When the error is cleared (the
one detected by the
annunciator)
When the error is cleared
Q00JCPU 2.1ms 2.0ms
Q00CPU 1.75ms 1.7ms
Q01CPU 1.45ms 1.35ms
Q02CPU 1.15ms 0.41ms
Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU
0.84ms 0.21ms Q02PHCPU, Q06PHCPU, Q12PHCPU, Q25PHCPU
Q12PRHCPU, Q25PRHCPU
3.5 ms
Size to be checked (steps)
*1
per scan
1024