Mitsubishi MOTORS Outlander PHEV 2017, Руководство пользователя

Страница: 255 / 548

Brake assist system
E00627001793
The brake assist system is a device assisting
drivers who cannot depress the brake pedal
firmly when it is necessary to do so (such as
in emergency stop situations) and provides
greater braking force.
If the brake pedal is depressed suddenly, the
brakes will be applied with more force than
usual.
CAUTION
l The brake assist system is not a device de-
signed to exercise braking force greater than
its capacity. Make sure to always keep a suf-
ficient distance between your vehicle and a
vehicle in front of you without relying too
much on the brake assist system.
NOTE
l Once the brake assist system is operational,
it maintains great braking force even if the
brake pedal is lightly released.
To stop its operation, completely remove
your foot from the brake pedal.
NOTE
l When the brake assist system is in use, you
may feel as if the depressed brake pedal is
soft, the pedal moves in small motions in
conjunction with the sound of the ABS oper-
ation, or the vehicle body and the steering
wheel vibrate. This occurs when the brake
assist system is operating normally and does
not indicate faulty operation. Continue to
firmly depress the brake pedal.
l You may hear an operation noise when the
brake pedal is depressed suddenly while sta-
tionary. This does not indicate a malfunction
and the brake assist system is operating nor-
mally.
l When the anti-lock brake system warning
lamp or only Active Stability Control warn-
ing lamp illuminate, the brake assist system
in not functioning.
Emergency stop signal
system
E00626001060
This is a device that reduces the possibility of
rear end collisions by the rapid and automatic
blinking of the hazard warning lamps to alert
vehicles approaching from behind during
sudden braking. When the emergency stop
signal system operates, the hazard warning
indication lamp in the instrument cluster
blinks rapidly at the same time.
CAUTION
l If the ABS warning or ASC warning is dis-
played, the emergency stop signal system
may not operate. Refer to “ABS warning
lamp/display” on page 7-38.
Refer to “ASC warning display” on page
7-42.
NOTE
l [Activating condition for the emergency stop
signal system]
It activates when all of the following condi-
tions are met.
• The vehicle speed is approximately
55 km/h (34 mph) or higher.
• The brake pedal has been depressed, and
the system judges that it was sudden brak-
ing from the vehicle deceleration and the
operating condition of the anti-lock brake
system (ABS).
[Deactivating condition for the emergency
stop signal system]
It deactivates when one of the following
conditions is met.
• The brake pedal is released.
• The hazard warning flasher switch is
pressed.
• The system judges that it was not sudden
braking from the vehicle deceleration and
the operating condition of the anti-lock
brake system (ABS).
Brake assist system
7-36
OGGE17E1
Starting and driving
7