Mitsubishi MOTORS LANCER EVOLUTION Скачать руководство пользователя страница 85

Страница: 85 / 330

WARNING

Do not set anything on, or attach any-

thing to, the instrument panel above the

glove box. It might strike and injure an

occupant if the airbag inflates.

WARNING

Do not attach accessories to, or put them

in front of, the windscreen. These objects

could restrict the airbag inflation, or

strike and injure an occupant if the air-

bags inflate.

Do not attach additional keys or accesso-

ries (hard, pointed or heavy objects) to

the ignition key. Such objects could pre-

vent the driver’s knee airbag from inflat-

ing normally or could be propelled and

cause serious injury if the airbag inflates.

WARNING

Do not attach accessories to the lower

portion of the driver’s side instrument

panel. Such objects could prevent the

driver’s knee airbag from inflating nor-

mally or could be propelled and cause se-

rious injury if the airbag inflates.

WARNING

Do not put packages, pets or other ob-

jects between the airbags and the driver

or front passenger. It could affect airbag

performance, or could cause injury when

the airbag inflates.

Right after the airbag inflation, several

airbag system components will be hot. Do

not touch them; you could be burned.

WARNING

The airbag system is designed to work

only once. Once the airbags have de-

ployed, they will not work again. They

must promptly be replaced and we rec-

ommend you to have the entire airbag

system inspected by a MITSUBISHI

MITSUBISHI MOTORS Authorized

Service Point.

Side airbag system

E00407600345

The side airbags (A) are contained in the driver and

front passenger seatbacks.

The side airbag is designed to inflate only on the

side of the vehicle that is impacted, even with no

passenger in the front seat.

Seat and seat belts

2-25

OCZE14E3

Содержание LANCER EVOLUTION











































































































































































































































































































































Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Бренды по названию

Популярные бренды

Mitsubishi MOTORS LANCER EVOLUTION, Руководство пользователя

Результаты поиска

Содержание LANCER EVOLUTION

Отзывы:

Бренды по названию

Популярные бренды