Mitsubishi MOTORS Lancer Evolution 2009, Руководство пользователя

Страница: 106 / 362

Interrupt display screen (when the ig-
nition switch is “ON”)
E00522000501
Warning display
When there is information to be announced, such
as a system fault, a sound is emitted and the infor-
mation screen is switched to the warning display
screen.
Refer to the warning list and take the necessary
measures. Refer to “Warning display list (when the
ignition switch is “ON”)” on page 3-26.
When the cause of the warning display is elimina-
ted, the warning display goes out automatically.
To return to the screen displayed before the
warning display
Even if the cause of the warning display is not elim-
inated, you can return to the screen that was dis-
played before the warning display.
If you press the multi-information meter switch,
the display screen switches to the screen that was
displayed before the warning display and the “!”
mark is displayed.
A- “!” mark
NOTE
l
Warning display screens with a “ ” or “ ”
mark displayed in the upper right of the
screen can be switched. If you want to switch
the display, press the multi-information me-
ter switch as follows.
“ ”
: Press lightly.
“ ”
: Press for about 2 seconds or more.
Redisplay of a warning display screen
When the “!” mark is displayed, if you lightly press
the multi-information meter switch a few times, the
warning display screen you switched from is redis-
played.
Other interrupt displays
The operation status of each system is displayed on
the information screen.
Refer to the appropriate page in the warning dis-
play list for further details.
Refer to “Other interrupt displays (when the igni-
tion switch is “ON”)” on page 3-32.
Gearshift lever position dis-
play screen*
E00527100031
Shows the position of the gearshift lever.
Refer to “Gearshift lever position dis-
play” on page 4-17.
Outside temperature display
screen
E00522100010
This shows the temperature outside the
vehicle.
NOTE
l The display setting can be
changed to the preferred unit (°C
or °F).
Refer to “Changing the function
settings (when the ignition switch
is “ON”)” on page 3-15.
l The outside temperature can be dis-
played in a range of -30 °C to
50 °C (-22 °F to 122 °F).
l Depending on factors such as the
driving conditions, the displayed
temperature may vary from the ac-
tual outside temperature.
Twin Clutch SST control
mode display screen*
E00526500025
The operation status of the Twin Clutch
SST control mode is displayed. Refer to
“Twin Clutch SST control mode” on
page 4-18.
Instruments and controls
3-12
3