Mitsubishi MOTORS Eclipse Cross 2019, Руководство пользователя

Страница: 247 / 602

NOTE
l
When reversing on an uphill slope, place the
gearshift lever or the selector lever into the
“R” position.
3. Release the brake pedal and the hill start
assist will maintain the braking force ap-
plied while stopped for approximately 2
seconds.
4. Depress the accelerator pedal and the
hill start assist will gradually decrease
the braking force as the vehicle starts
moving.
NOTE
l The hill start assist is activated when all of
the following conditions are met.
•
The engine is running.
(The hill start assist will not be activated
while the engine is starting or immediate-
ly after the engine is started.)
NOTE
• On vehicles equipped with M/T, the gear-
shift lever is in the following position.
[When starting an uphill slope forwards.]
The gearshift lever is in any position other
than “R”.
(The hill start assist will operate, even if
the gearshift lever is in the “N” position.)
[When starting an uphill slope back-
wards.]
The gearshift lever is in the “R” position.
(The hill start assist will not operate when
the gearshift lever is in the “N” position.)
• On vehicles equipped with A/T or CVT,
the selector lever is in any position other
than “P” or “N”.
• The vehicle is completely stationary, with
the brake pedal depressed.
• The parking brake is released.
l The hill start assist will not operate if the ac-
celerator pedal is depressed before the brake
pedal is released.
l The hill start assist also operates when re-
versing on an uphill slope.
Warning lamp/display
If an abnormal condition occurs in the sys-
tem, the following warning lamp/display will
be shown.
Warning lamp
- ASC indicator
Warning display
CAUTION
l
If the warning is displayed, the hill start as-
sist will not operate. Start off carefully.
l Park your vehicle in a safe place and stop
the engine.
Restart the engine and check whether the
display/indicator goes out, in which case the
hill start assist is again working normally.
If they remain displayed or reappear fre-
quently, it is not necessary to stop the vehi-
cle immediately, but the vehicle should be
inspected by a MITSUBISHI MOTORS Au-
thorized Service Point as soon as possible.
Brake assist system
The brake assist system is a device assisting
drivers who cannot depress the brake pedal
firmly when it is necessary to do so (such as
in emergency stop situations) and provides
greater braking force.
Brake assist system
6-61
OGKE20E1
Starting and driving
6