Mitsubishi MOTORS Eclipse Cross 2019, Руководство пользователя

Страница: 221 / 602

NOTE
l
On vehicles equipped with A/T or CVT,
while the engine is stopped automatically, if
the selector lever is moved to the “P”
(PARK) position quickly with the brake ped-
al firmly depressed, the engine does not re-
start automatically even if you release the
brake pedal.
If this occurs, the
display will blink to
inform the driver.
If you want to restart the engine, depress the
brake pedal again.
If you want to put the operation mode in
OFF, press the engine switch without de-
pressing the brake pedal. (on vehicles equip-
ped with the keyless operation system)
To deactivate
The AS&G system is automatically activated
when the ignition switch is turned to the
“ON” position or the operation mode put in
ON. You can deactivate the system by press-
ing the “Auto Stop & Go (AS&G) OFF”
switch.
When the AS&G system is deactivated, the
display will be turned on.
To reactivate the AS&G system, press the
“Auto Stop & Go (AS&G) OFF” switch; the
display will turn off.
AS&G OFF indicator display
NOTE
l This display will also turn on for a few sec-
onds when the ignition switch is turned to
the “ON” position or the operation mode put
in ON.
If the warning lamp/display
blinks while driving
If the warning display appears on the infor-
mation screen in the multi-information dis-
play and the
indicator display blinks,
the AS&G system is malfunctioning and will
not operate.
We recommend you to consult a
MITSUBISHI MOTORS Authorized Service
Point.
Manual transmission*
The shift pattern is shown on the gearshift
lever knob. Press the clutch pedal all the way
down while shifting gears. To start off, press
the clutch pedal all the way down and shift
into the 1
st
or “R” (Reverse) position, operat-
ing the gearshift lever slowly.
Then gradually release the clutch pedal while
depressing the accelerator pedal.
Manual transmission*
6-35
OGKE20E1
Starting and driving
6