Mitsubishi MOTORS Eclipse Cross 2019, Руководство пользователя, Страница: 183 / 602

NOTE
l
It is possible to modify functions as follows:
• Causing the wiper never to operate when
washer fluid is sprayed.
• Except for vehicles for Russia, Kazakh-
stan, Belarus, Ukraine and Moldova, de-
activating the comfort washer.
• Except for vehicles for Russia, Kazakh-
stan, Belarus, Ukraine and Moldova, de-
activating the function that operates the
wipers once more approximately 6 sec-
onds later.
• Vehicles for Russia, Kazakhstan, Belarus,
Ukraine and Moldova, activating the com-
fort washer.
• Vehicles for Russia, Kazakhstan, Belarus,
Ukraine and Moldova, the wipers can be
set to operate again after approximately 6
seconds.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point.
On vehicles equipped with the Smartphone
Link Display Audio or the MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make the
adjustment. Refer to the separate owner’s
manual for details.
Rear window wiper and wash-
er
The rear window wiper and washer switch
can be operated with the ignition switch or
the operation mode in ON or ACC.
INT- The wiper operates continuously
for several seconds then oper-
ates intermittently at intervals of
approximately every 8 seconds
OFF- Off
-
The washer fluid will be sprayed
onto the rear window when the
knob is turned fully in either di-
rection.
The wipers operate automatical-
ly several times while the wash-
er fluid is being sprayed.
NOTE
l
The rear window wiper will automatically
perform several continuous operations if the
gearshift lever or the selector lever is put in
the “R” position while the windscreen wip-
ers or the rear window wiper is operating.
(automatic operation mode)
After the automatic operation, the rear win-
dow wiper will stop operating if the knob is
in the “OFF” position. If the knob is in the
“INT” position, the rear window wiper will
return to the intermittent operation.
It is possible to set the rear window wiper to
perform the automatic operation only if the
gearshift lever or the selector lever is put in
the “R” position while the rear window wip-
er is operating with the knob in the “INT”
position.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point.
l
If the knob is in the “OFF” position, turn the
knob to the “INT” position twice quickly to
operate the rear window wiper continuously.
(continuous operation mode)
Turn the knob to the “OFF” position to stop
the rear window wiper continuous operation.
Wiper and washer switch
5-71
OGKE20E1
Instruments and controls
5