Mitsubishi MOTORS ASX Series, Руководство пользователя

Страница: 185 / 514

ON
The engine is running, and all the vehicle’s
electrical devices can be operated.
START
The starter motor operates. After the engine
has started, release the key and it will auto-
matically return to the “ON” position.
NOTE
l Your vehicle is equipped with an electronic
immobilizer.
To start the engine, the ID code transmitted
by the transponder inside the key must
match the code registered in the immobilizer
computer.
Refer to “Electronic immobilizer (Anti-theft
starting system)” on page 3-03.
ACC power auto-cutout func-
tion
E00620300224
After about 30 minutes has elapsed with the
ignition switch in the “ACC” position, the
function automatically cuts out the power for
the audio system and other electric devices
that can be operated with that position.
When the ignition switch is turned from the
“ACC” position, the power is supplied again
to those devices.
NOTE
l
It is possible to modify functions as follows:
• The time until the power cuts out can be
changed to approximately 60 minutes.
• The ACC power auto-cutout function can
be deactivated.
For details, we recommend you to consult
a MITSUBISHI MOTORS Authorized
Service Point.
To remove the key
E00620400528
1. Set the selector lever to the “P” (PARK)
position (A/T or CVT).
2. Push the key in at the “ACC” position
and keep it depressed until it is turned to
the “LOCK” position and remove it.
CAUTION
l
Do not remove the ignition key from the ig-
nition switch while driving. The steering
wheel will be locked, causing loss of con-
trol.
l
If the engine is stopped while driving, the
brake servomechanism will cease to function
and braking efficiency will deteriorate. Also,
the power steering system will not function
and it will require greater manual effort to
operate the steering.
l Do not leave the key in the “ON” position
for a long time when the engine is not run-
ning, doing so will cause the battery to be
discharged.
l Do not turn the key to the “START” position
while the engine is running. Doing so could
damage the starter motor.
Steering wheel lock
E00601500676
[For vehicles equipped with keyless opera-
tion system]
For information on operations for vehicles
equipped with the keyless operation system,
refer to “Keyless operation system: Steering
wheel lock” on page 3-16.
[Except for vehicles equipped with keyless
operation system]
To lock
Remove the key at the “LOCK” position.
Steering wheel lock
6-13
OGAE18E1
Starting and driving
6