En-10
Operation indicator lamp
When the remote controller cannot be used...
Emergency operation can be activated by pressing the emergency operation
switch (E.O.SW) on the indoor unit.
Each time the E.O.SW is pressed, the operation changes in
the following order:
If a power failure occurs or the main power is turned off during operation, “Auto
restart function” automatically starts operation in the same mode as the one set
with the remote controller just before the shutoff of the main power. When timer is
set, timer setting is cancelled and the unit starts operation when power is resumed.
If you do not want to use this function, please consult the service repre-
sentative because the setting of the unit needs to be changed.
Set temperature : 24°C
Fan speed : Medium
Horizontal vane : Auto
Emergency COOL
Emergency HEAT
Stop
Note:
• The fi rst 30 minutes of operation is test run. Temperature
control does not work, and fan speed is set to High.
• In the emergency heating operation, the fan speed gradu-
ally rises to blow out warm air.
• In the emergency cooling operation, the horizontal vanes’
position will be reset in about a minute, then the operation
will start.
E
MERGENCY OPERATION
A
UTO RESTART FUNCTION
JG79Y359H01_en.indd 10
2017/10/18 9:27:48
Содержание MSZ-AP15VF
Страница 172: ...A4_white_tombo indd 1 2016 04 25 10 16 47 ...
Страница 173: ...A4_white_tombo indd 1 2016 04 25 10 16 47 ...
Страница 174: ...A4_white_tombo indd 1 2016 04 25 10 16 47 ...