Mitsubishi Electric MR-J5 Series, Руководство пользователя

Страница: 53 / 316

3 SIGNALS AND WIRING
3.4 Connectors and pin assignments
51
3
*1 I: input signal, O: output signal
*2 P: position control mode, S: speed control mode, T: torque control mode, P/S: position/speed control switching mode, S/T: speed/torque
control switching mode, T/P: torque/position control switching mode
*3 Output devices are not assigned by default. Assign the output devices with [Pr. PD47] as necessary. This pin is available only with MR-
J5-_A_-RJ.
*4 This is available as an input device of a sink interface. If using it, assign the input device with [Pr. PD43] to [Pr. PD46] as necessary. In
addition, of 24 V DC to the CN3-12 pin.
*5 This is available as an input device of a source interface. If using it, assign the input device with [Pr. PD43] to [Pr. PD46] as necessary.