- 1 -
1. Features
The pneumatic type label holder unit is an attachment dedicated for sewing on labels. The entire
periphery of the label can be sewn on while pressing down on the inside of the label.
Superimposed stitching or backstitching can be done at the start and end of stitching.
2. Specifications
Name
：
MP-G10-AH (pneumatic type label holder unit)
Applicable model:
：
PLK-G1010
Stitching range
：
100(X) mm
×
80(Y) mm
Maximum speed
：
2,300 rpm
Clamp UP position
：
20 mm
Pressing operation
：
Use foot switch (2-pedal) normally provided with
the electronic sewing machine and the
expansion foot switch (1-pedal)
Drive source air
pressure
Primary side
：
0.5MPa
（
5kg/cm
2
）
or more
Secondary side:
：
0.4MPa
（
4kg/cm
2
）
Trouble such as operation errors could occur if the secondary pressure is set too high.
Use within the range of 0.4MPa (4kg/cm
2
).
CAUTION
