Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 105 / 230

104
3. FUNCTION
3.1 Parameter list
3.1.6 Editing the individual list
Set parameters to be shown when the [Individual list] filter is selected. Select [Edit individual list] from the [Parameter list (Z)]
menu bar, or [Edit individual list] on the toolbar to display the "Edit individual list" window.
3.1.7 Settings by function
Parameters related to each function can be set in the individual windows.
Select [Settings by function] - [Function name] from the [Parameter list (Z)] menu bar, [Settings by function] - [Function name]
on the toolbar, or [Parameter] - [Function name] from the project tree to display the window by function.
NOTE
• Some of the settings by function are not available depending on the inverter model.
 Toolbar for settings by function
The toolbar for setting by function is described below.
A
D
E
C B
G
F
Symbol Name Function/description
A Open Reads the stored individual list.
B Save As Saves a completed individual list.
C Add Adds the selected parameters to the individual list.
D Filter Select a filter for filtering the parameters in the parameter list.
E Parameter list Displays the parameters.
F Delete Deletes the selected parameters in the individual list.
G Individual list Displays the selected parameters for the individual list.
A B C D
F G
E
H I J