Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 100 / 230

99
3. FUNCTION
3.1 Parameter list
1
2
3
4
5
6
7
8
9
10
3.1
Parameter list
The following functions can be performed using the "Parameter list".
• Parameter display
• Parameter setting value read, batch read
• Parameter setting value input, write, batch write
• Parameter clear / all parameter clear
• Parameter verify
• Parameter search
To display the "Parameter list", select [Parameter list...] in the [Parameter] menu, or the "Parameter list" can be displayed by
clicking on the toolbar. "Parameter list" cannot be displayed if no project file has been created, or if no project file is open.
The available "Parameter list" functions are different at online and offline.
( ○ : operation available; ×: operation not available)
NOTE
• FR Configurator2 parameter list supports the latest inverter at the time of FR Configurator2 upgrade. The setting range, initial
value, number of parameters, etc., may be different with the inverter before upgrading (additional functions).
• Although the parameter name of the instruction manual and the parameter name of FR Configurator2 may be different, there
is no difference in the parameter function.
• Pr.296 and Pr.297 do not appear in the parameter list. Pr.296 and Pr.297 will not change even if parameter settings of another
inverter are read. Change Pr.296 and Pr.297 from the operation panel or the parameter unit.
3.1.1 Parameter list
Function Online Offline
All parameter clear ○ ×
Parameter clear ○ ×
Batch read ○ ×
Read ○ ×
Batch write ○ ×
Write ○ ×
Verify ○ ○
Parameter setting value
input
○ ○
Undo ○ ○
Redo ○ ○
Search ○ ○
B C I J
Q U P R V T
E
F F G G G
H
A
D
O
M N K L
S