Mitsubishi Electric MELSERVO MR-JET-G Series, Руководство пользователя

Страница: 48 / 164

46
1 SERVO PARAMETER DETAILS
1.3 Gain/filter setting servo parameters group ([Pr. PB_ _ ])
[Pr. PB47.2_Notch width selection]
0: α = 2
1: α = 3
2: α = 4
3: α = 5
[Pr. PB48_Machine resonance suppression filter 4 (NH4)]
Set the notch frequency of the machine resonance suppression filter 4.
When [Pr. PB49.0 Machine resonance suppression filter 4 selection] is set to "1" (enabled), set the notch frequency with this
servo parameter.
[Pr. PB49_Notch shape selection 4 (NHQ4)]
Set forms of the machine resonance suppression filter 4.
[Pr. PB49.0_Machine resonance suppression filter 4 selection]
0: Disabled
1: Enabled
When this setting value is "Enabled", [Pr. PB17 Shaft resonance suppression filter] cannot be used.
[Pr. PB49.1_Notch depth selection]
0: -40 dB
1: -14 dB
2: -8 dB
3: -4 dB
[Pr. PB49.2_Notch width selection]
0: α = 2
1: α = 3
2: α = 4
3: α = 5
Initial value Setting range Ver.
0h Refer to the text A4
Initial value Setting range Ver.
4500 [Hz] 10 to 9000 A4
Initial value Setting range Ver.
00000000h Refer to the relevant detail No. Refer to the relevant detail No.
Initial value Setting range Ver.
0h Refer to the text A4
Initial value Setting range Ver.
0h Refer to the text A4
Initial value Setting range Ver.
0h Refer to the text A4