Mitsubishi Electric MELSERVO MR-JET-G Series, Руководство пользователя

Страница: 47 / 164

1 SERVO PARAMETER DETAILS
1.3 Gain/filter setting servo parameters group ([Pr. PB_ _ ])
45
1
[Pr. PB45.2_Notch depth selection]
Refer to the following table for details.
[Pr. PB46_Machine resonance suppression filter 3 (NH3)]
Set the notch frequency of the machine resonance suppression filter 3.
When [Pr. PB47.0 Machine resonance suppression filter 3 selection] is set to "1" (enabled), set the notch frequency with this
servo parameter.
[Pr. PB47_Notch shape selection 3 (NHQ3)]
Set forms of the machine resonance suppression filter 3.
[Pr. PB47.0_Machine resonance suppression filter 3 selection]
0: Disabled
1: Enabled
[Pr. PB47.1_Notch depth selection]
0: -40 dB
1: -14 dB
2: -8 dB
3: -4 dB
Initial value Setting range Ver.
0h Refer to the text A4
Setting value Depth [dB]
0 -40.0
1 -24.1
2 -18.1
3 -14.5
4 -12.0
5 -10.1
6 -8.5
7 -7.2
8 -6.0
9 -5.0
A -4.1
B -3.3
C -2.5
D -1.8
E -1.2
F -0.6
Initial value Setting range Ver.
4500 [Hz] 10 to 9000 A4
Initial value Setting range Ver.
00000000h Refer to the relevant detail No. Refer to the relevant detail No.
Initial value Setting range Ver.
0h Refer to the text A4
Initial value Setting range Ver.
0h Refer to the text A4