manualshive.com logo in svg

Mitsubishi Electric Melservo MR-J5 G Series, Руководство пользователя

Mitsubishi Electric Melservo MR-J5 G Series – мощный и надежный приводной узел, предназначенный для широкого спектра применений. Вы можете скачать бесплатно руководство пользователя на нашем сайте, чтобы узнать больше о возможностях этого устройства. Главное - желание узнать больше, всегда доступно на manualshive.com.

Поделиться
Скачать
background image

206

4  APPLICABLE FUNCTIONS
4.5  Machine diagnosis

Total travel distance failure prediction function

Outline [G] [WG]

The total travel distance failure prediction function can check the total travel distance of devices and that of the servo motor 
after the shipment.
The servo motor total travel distance indicates the cumulative number of rotations or total travel distance of the servo motor.
The servo motor total travel distance is intended to be used as a guide for the timing of replacement and maintenance of the 
servo motor and mechanical parts in the equipment.
The servo amplifier has the data of the servo motor total travel distance. Therefore, perform settings on the servo amplifier 
such as offsetting and resetting after replacing the equipment parts.
By setting [Pr. PF34.2 Servo motor total travel distance failure prediction warning selection], when the servo motor total travel 
distance exceeds the threshold, a warning is outputted by the servo amplifier and the servo motor and mechanical parts 
failure can be predicted in advance.

Outline [A]

The total travel distance failure prediction function can check the total travel distance of devices and that of the servo motor 
after the shipment.
The servo motor total travel distance indicates the cumulative number of rotations or total travel distance of the servo motor.
The servo motor total travel distance is intended to be used as a guide for the timing of replacement and maintenance of the 
servo motor and mechanical parts in the equipment.
The servo amplifier has the data of the servo motor total travel distance. Therefore, perform settings on the servo amplifier 
such as offsetting and resetting after replacing the equipment parts.
By setting [Pr. PF51.2 Servo motor total travel distance failure prediction warning selection], when the servo motor total travel 
distance exceeds the threshold, a warning is outputted by the servo amplifier and the servo motor and mechanical parts 
failure can be predicted in advance.

Precautions [G] [WG]

 • In the total travel distance failure prediction function, the servo motor total travel distance will be calculated when [Pr. 

PF34.0] is set to a value other than "0" (disabled), or [Pr. PF34.2] is set to "1" (enabled).

Precautions [A]

 • In the total travel distance failure prediction function, the servo motor total travel distance will be calculated when [Pr. 

PF51.0] is set to a value other than "0" (disabled), or [Pr. PF51.2] is set to "1" (enabled).

Total travel distance reading method [G] [WG]

The servo motor total travel distance can be read with the engineering tool (MR Configurator2) via network or USB 
connection. The value set in [Pr. PF47 Servo motor total travel distance offset] is added to the read servo motor total travel 
distance.

■

When reading the total travel distance via the network

Specify and read the target object. Refer to the following for details of the objects.

Page 212 Related objects [G] [WG]

■

When reading the total travel distance with an engineering tool (MR Configurator2)

Select the servo motor total travel distance on the machine diagnosis screen and click "Read". The servo motor total travel 
distance at the time of clicking "Read" is displayed, and can be checked and compared with the threshold of the servo motor 
total travel distance. In addition, the read servo motor total travel distance can be saved on the machine diagnosis screen. 
The displayed range is from 0 to 42949672950. If it exceeds this range, it is clamped at the maximum value.

Содержание Melservo MR-J5 G Series



























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Melservo MR-J5 G Series

XIEGU XPA125 Instruction Manual preview
XPA125
Бренд: XIEGU Страницы: 16
NAD C 352 Owner'S Manual preview
C 352
Бренд: NAD Страницы: 78
Wittenstein Alpha Cyber Simco Drive 2 Operating Manual preview
Cyber Simco Drive 2
Бренд: Wittenstein Alpha Страницы: 56
Skytec SKY-1200MKII Instruction Manual preview
SKY-1200MKII
Бренд: Skytec Страницы: 26
Xtant NGM 1 Owner'S Manual preview
NGM 1
Бренд: Xtant Страницы: 2
Lynx Subamp SBA-12000 Operation Manual preview
Subamp SBA-12000
Бренд: Lynx Страницы: 12
Surpass SP-150MB User Manual preview
SP-150MB
Бренд: Surpass Страницы: 14
DAPAudio TAS-1100 Manual preview
TAS-1100
Бренд: DAPAudio Страницы: 18
TC Electronic BH250 Manual preview
BH250
Бренд: TC Electronic Страницы: 24
Quicksilver Audio M80 Operating Instructions preview
Audio M80
Бренд: Quicksilver Страницы: 3
Marantz PM6010OSE Instructions Manual preview
PM6010OSE
Бренд: Marantz Страницы: 10
Earthworks ZDT-1021 Owner'S Manual preview
ZDT-1021
Бренд: Earthworks Страницы: 2
Flintec FAA-27 Technical Manual preview
FAA-27
Бренд: Flintec Страницы: 22
Lab.gruppen LAB 1300C User Manual preview
LAB 1300C
Бренд: Lab.gruppen Страницы: 12
AR 10052412 Operating And Service Manual preview
10052412
Бренд: AR Страницы: 80
Denon PMA-2000AE Service Manual preview
PMA-2000AE
Бренд: Denon Страницы: 34
Texas Instruments TPA3200D1 User Manual preview
TPA3200D1
Бренд: Texas Instruments Страницы: 13
Crate BFX100T User Manual preview
BFX100T
Бренд: Crate Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды