Mitsubishi Electric Melservo-Jet HG-KNS Series, Руководство пользователя, Страница: 22 / 108

20
2 INSTALLATION
2.10 Mounting rotary servo motors
2.10
Mounting rotary servo motors
Be sure to use the rotary servo motor within the specified environment, and mount the rotary servo motor on a machine
having the equivalent heat dissipation effect as the following aluminum flange.
The temperature of the rotary servo motor increases differently depending on its mounting environment, operating conditions,
and other factors. Check the temperature with an actual machine.
2.11
Restrictions when using this product at an altitude
exceeding 1000 m and up to 2000 m
As heat dissipation effects decrease in proportion to decreasing air density, use the product within the effective load ratio and
regenerative load ratio shown in the following figure.
Flange size
[mm] Rotary servo motor
HG-KNS HG-SNS
250 × 250 × 6 13
23 
250 × 250 × 12 43 52
102
152
300 × 300 × 12 73

300 × 300 × 20  202
302
0 2000 1000
95
100
0
[%]
[m]
Altitude
Regenerative load ratio
Effective load ratio