manualshive.com logo in svg

Mitsubishi Electric MELSEC Q80BD-J71GF11-T2, Руководство пользователя

Поделиться
Скачать
Mitsubishi Electric MELSEC Q80BD-J71GF11-T2 Скачать руководство пользователя страница 82

80

6  INSTALLING AND UNINSTALLING SOFTWARE PACKAGES
6.1  Installation and Uninstallation Precautions

6

INSTALLING AND UNINSTALLING SOFTWARE 
PACKAGES

This chapter explains the software package installation and uninstallation.

6.1

Installation and Uninstallation Precautions

The following are the precautions when installing and uninstalling the software package.
 • Log on as a user with administrator authority.
 • Make sure to close other applications running on Windows (including resident software such as antivirus software) before 

installation and uninstallation.

 • The installer may not work normally because the update program of operating system or other companies' software such as 

Windows Update and Java

 update may start automatically. Please install the driver after changing the setting of the 

update program not to start automatically.

 • Check if the display settings on the [Device Manager] of Windows are correct, then install an appropriate display driver, or 

update the Windows.

 • The language switching function of the operating system set by "Regional and Language Options" on the Control Panel 

screen is not supported. The installation or uninstallation may not work normally if the language setting is changed.

 • Enable the .NET Framework 3.5 (including .NET 2.0 or 3.0) in "Turn Windows features on or off" on the control panel.
 • A network drive cannot be specified as the installation destination.
 • When the parameters have been set with the utility installed, the parameters are initialized at installation. Save the 

parameters with the save file function before installing the utility.

 • When the software package has been installed in the environment that the creation of 8.3 filename is disabled, the software 

package may not be uninstalled. Enable the creation of 8.3 filename before installing the software package. For the method 
on how to check and change the status of 8.3 filename creation to enable/disable, refer to the website of Microsoft 
Corporation.

 • When using SW1DNC-CCIEF-B Version 1.10L or later, apply Service Pack1 and Security Update for Windows 

(KB3033929) to Windows 7 and Windows Server 2008 R2.

 • To Windows Server 2016, apply Windows Updates (KB4132216, KB4091664, KB4465659, and KB4480977).
 • When installing the software package, enable "User Account Control: Detect application installations and prompt for 

elevation" in 'Local Security Policy' in Windows.

6.2

Installation

The following explains a procedure for installing the software package.

Installation procedure

1.

Insert the CD-ROM to the CD-ROM drive.

2.

Double-click the "Setup.exe" file on the CD-ROM.

3.

By the on-screen instructions, select or enter the necessary information. Refer to the following section when the screen 
for which corrective action is not clear, is displayed.

Page 145 Action displayed on the screen is not effective while installation

4.

Restart the personal computer.

Содержание MELSEC Q80BD-J71GF11-T2

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды