Mitsubishi Electric MELSEC Q80BD-J71GF11-T2, Руководство пользователя

Страница: 106 / 248

104
10 SETTING PARAMETERS
10.2 Setting Network Parameter
Network operation setting
Set the parameter name and network operation at data link error.
Window
[View]  [Network Parameter]  "CC IE Field Number of Boards Setting" screen  "Network Operation Setting"
Operating procedure
1.
Set the items on the screen.
2.
Click the [End] button.
Event setting
Set conditions to notify events to a user program.
Window
[View]  [Network Parameter]  "CC IE Field Number of Boards Setting" screen  "Event Setting"
Operating procedure
1.
Set the items on the screen.
Item Description
Parameter Name Set the parameter name of the "Network Operation Setting".
Setting range: Up to 8 characters
Data Link Faulty Station Setting Select whether to hold or clear data input from the slave station where a data link error has occurred.
Item Description
Input Format Set the format of the setting value.
Device Code
*1
Set the link device name for the event condition.
Device No. Set the link device number for the event condition.
Setting range:
For link devices RX and RY: 0 to 3FFF
For link devices SB and SW: 0 to 01FF
For link devices RWw and RWr: 0 to 1FFF
Detection Method Set the detection method. (

Page 105 Combination of detection method and event condition)